Description
The stock trigger on a Glock 43, 43X, or 48 gets the job done, but the curved factory shoe can leave your finger sitting in a slightly different spot every press. Tyrant CNC built the I.T.T.S. (Improved Tyrant Trigger System) shoe to fix exactly that. It's a hybrid face that sits somewhere between a flat and a curved trigger, with a flatter top section for repeatable finger placement and a subtle lip at the bottom that helps you find the same reference point shot after shot. The result is a cleaner, more predictable pull without turning your carry gun into something twitchy.
What the I.T.T.S. Shoe Does Differently
This is a trigger shoe upgrade, not a full trigger job, so it keeps your pull weight in familiar carry territory while sharpening how the trigger feels and resets. The design trims take-up by roughly 15% and cuts reset travel by about 10%, which gives you a more defined wall and quicker recovery between shots. Folks who run these tend to notice the flat face feels easier on the finger over a long range session, and while it doesn't lighten the pull, the flatter geometry often makes it feel lighter than the OEM shoe.
Built From 7075 Aluminum and 24K Gold Hardware
The shoe is CNC-machined from 7075 aluminum with a gold anodized finish, paired with a gold safety blade and set screws that are 24K gold-plated stainless steel. Worth knowing: the plated gold hardware is a slightly different shade than the anodized shoe, so it reads as a two-tone gold-on-black look rather than a perfect color match. Instead of factory roll pins, Tyrant uses threaded set screws to hold the shoe and safety in place, which makes installation and future swaps a lot less fiddly.
Fitment for Your Glock 43, 43X, or 48
This shoe is cut specifically for the slimline Glock 43, 43X, and 48 across Gen 3 and Gen 4 platforms. Keep in mind this listing is the shoe, safety, and screws only. It does not include a trigger bar, so you'll be reusing your factory bar during the swap. If you're comfortable field-stripping your Glock, this is a straightforward at-home upgrade that gives your everyday carry pistol a real personality change.
Key Specifications
- Manufacturer: Tyrant CNC
- Model: I.T.T.S. (Improved Tyrant Trigger System)
- Manufacturer Part Number: TDG43TRIGGOLDBLACK
- UPC: 7426848614927
- Fits: Glock 43, 43X, 48
- Generation Compatibility: Gen 3 and Gen 4
- Trigger Face: Hybrid curved/flat
- Shoe Material: 7075 aluminum, gold anodized
- Hardware: 24K gold-plated stainless steel safety blade and set screws
- Take-Up Reduction: Approximately 15%
- Reset Travel Reduction: Approximately 10%
- Fastening: Threaded set screws (no roll pins)
- Color: Gold shoe / black accents
What’s Included
- Tyrant CNC I.T.T.S. trigger shoe (gold anodized)
- Gold-plated safety blade
- Gold-plated set screws
Frequently Asked Questions
Does the Tyrant CNC I.T.T.S. shoe come with a trigger bar?
No. This SKU is the trigger shoe, safety blade, and set screws only. You'll reuse your factory Glock trigger bar during installation, so plan on keeping your original bar handy when you do the swap.
Will this trigger shoe fit my Glock 43X and Glock 48?
Yes. It's machined specifically for the slimline Glock 43, 43X, and 48 on Gen 3 and Gen 4 platforms. It's a drop-in replacement for the factory shoe on those models.
Does the I.T.T.S. shoe lighten the trigger pull?
Not really, and that's by design for a carry gun. It keeps your pull weight in familiar territory while trimming take-up and reset travel. The flatter hybrid face often makes the pull feel lighter and cleaner even though the actual weight stays close to stock.
Does the gold hardware perfectly match the gold shoe?
Not exactly. The shoe is gold anodized while the safety and screws are 24K gold-plated stainless, so the two shades differ slightly. Most folks like the two-tone gold-on-black look, but it's worth knowing they aren't an identical match.





Reviews
There are no reviews yet.