Description
This Redding Type S Match Bushing Neck Die Set is made for the 7mm Rem SAUM handloader who treats consistency as a non-negotiable. Instead of a one-size-fits-all neck sizer, you get a bushing-based system that lets you choose exactly how much tension your necks hold, which is the kind of control that pays off downrange when you're chasing tight groups and long case life. It's a 3-die set that covers neck sizing, body resizing, and competition-grade bullet seating in one box.
What's Inside the 7mm Rem SAUM Type S Set
The set includes three dies: the Type S Bushing Neck Sizing Die, a Body Die, and a Competition Seating Die. The neck die handles external neck sizing through interchangeable bushings, the Body Die full-length resizes the case body and bumps the shoulder for proper chambering without touching the neck, and the Competition Seating Die takes care of precise, repeatable bullet seating. The neck die ships with a decapping rod, a standard sizing button, and a decapping pin retainer you can swap in if you'd rather skip the inside button and only size the neck externally.
Dialing In Neck Tension With the Type S Bushing Neck Die
The heart of this set is the bushing design. Bushings are available in .001 inch increments, so you can tune neck tension to match your load and your brass rather than settling for whatever a fixed die gives you. Each bushing free-floats and self-centers on the case neck, which cuts down on runout and keeps your sized necks concentric. The adjustable decapping rod lets you position the bushing to size only part of the neck length if that's what your setup calls for.
Seating Depth That Repeats
Redding's Competition Seating Die has long been regarded as a benchmark for straight-line seaters. The seating stem is ground to match bullet diameter, and the micrometer head is calibrated in .001 inch increments with infinite, click-free adjustment, so returning to a favorite seating depth is quick and dead-on. A sliding sleeve supports and aligns the case and bullet before seating begins, which is where that reputation for low runout comes from. Keep in mind bushings and the shellholder are sold separately so you can match them to your exact needs.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 38280
- UPC: 611760382802
- Cartridge: 7mm Rem SAUM (7mm Remington Short Action Ultra Magnum)
- Set Type: Type S Match Bushing Neck Sizing 3-Die Set
- Dies Included: Bushing Neck Sizing Die, Body Die, Competition Seating Die
- Die Quantity: 3
- Bushing Increments: .001 inch
- Seating Die Adjustment: Micrometer, .001 inch increments, click-free
- Thread: 7/8-14 standard
- Country of Manufacture: United States
What’s Included
- Type S Bushing Neck Sizing Die with decapping rod and standard sizing button
- Decapping pin retainer (for external-only neck sizing)
- Body Die
- Competition Seating Die with sliding sleeve and micrometer head
- Die box
- Instructions
Frequently Asked Questions
Does the 7mm Rem SAUM Type S Match set come with bushings?
No, the neck sizing bushings are sold separately so you can select the exact size for your brass and the neck tension you want. Bushings are available in .001 inch increments. The shellholder is also sold separately.
What dies are in this Type S Match Bushing Neck Die Set?
It's a 3-die set that includes the Type S Bushing Neck Sizing Die, a Body Die, and a Competition Seating Die. The neck die controls neck tension with interchangeable bushings, the Body Die full-length sizes the case body and bumps the shoulder, and the Competition Seating Die handles precise bullet seating depth.
What's the difference between this neck set and the Type S Full Length set?
This neck-sizing set uses a bushing die that sizes the neck only, plus a separate Body Die for when the case body needs resizing or a shoulder bump. The Type S Full Length set sizes the body and neck in one pass. Neck sizing setups like this one are popular with bolt-gun reloaders chasing longer case life and tight concentricity.
Can I size only part of the neck with this die?
Yes. The adjustable decapping rod lets you position the bushing to resize only a portion of the neck length if that's what your load calls for. The free-floating bushing also self-centers on the case neck to help keep runout low.




Reviews
There are no reviews yet.