Description
Lefties finally get the TriggerTech treatment they deserve. The Rough Diamond is a single-stage, drop-in trigger built specifically for left-hand Remington 700 clone actions, and it brings the same frictionless, zero-creep break that put the Diamond series on the map. It's the refined follow-up to the original Diamond, tweaked with a slightly heavier minimum pull and adjusted engagement geometry that makes it tougher and more forgiving in real-world conditions without giving up that glass-rod snap you feel the moment it goes off.
What Makes the Rough Diamond Break So Clean
TriggerTech's Zero Creep design doesn't rely on polishing, coating, or lubing the engagement surfaces to feel good. Instead it uses a free-floating roller between the sear and the trigger, so the break stays crisp and identical from the first round to thousands down the road. Pair that with TKR and CLKR technology and you get a trigger you can tune by feel using audible, tactile clicks, no gunsmithing required. Adjustment is easy enough to do in the field.
Built for the Rough Diamond Name
The housing is anodized 7075 aluminum wrapped around hardened 440C stainless internals, with a clean PVD black finish on the external stainless parts. That combination fights corrosion and holds up to the dirt, wet, and rough handling that come with hunting and match shooting. The pull weight range runs from around 8 oz up to 40 oz, which covers everything from a delicate precision setting to a heavier, hunt-ready pull. The flat trigger lever gives you a consistent finger placement and a straight-back press.
Fitment Notes Before You Buy
One thing to know up front: this trigger has no bolt release and is made for Remington 700 clone actions that carry the bolt release on the receiver itself. It's not designed for factory Remington 700 actions. If you're running a custom or clone action from one of the popular builders, you're in the right place, and you'll appreciate the lifetime warranty backing it up.
Key Specifications
- Manufacturer: TriggerTech
- Model: Rough Diamond (Diamond series)
- Manufacturer Part Number: R7L-SAB-02-TNF
- UPC: 885768004046
- Weapon Platform: Remington 700 Clone Actions
- Trigger Action: Single Stage
- Lever Type: Flat Straight
- Hand: Left Hand
- Pull Weight Range: Approx. 8 oz to 40 oz
- Overtravel: Sub .010 inch
- Bolt Release: Without (cloned actions only)
- Safety: Yes, removable
- Housing Material: 7075 Aluminum (anodized)
- Key Internal Components: 440C Stainless Steel
- Finish: PVD Black
- Warranty: Product Lifetime
What’s Included
- TriggerTech Rough Diamond single-stage trigger (left-hand, flat, black)
- Instruction manual
Frequently Asked Questions
Will the Rough Diamond fit a factory Remington 700 action?
No. This trigger is built for Remington 700 clone and custom actions that have the bolt release built into the receiver. It ships without a bolt release, so it isn't designed for factory Remington 700 actions.
How light can I set the Rough Diamond trigger?
The pull weight is adjustable from roughly 8 oz up to 40 oz. Keep in mind that actual pull weight is influenced by your firing pin spring, so an overweight spring can push the pull above the advertised range. You can dial it in using the tactile click adjustments without pulling the trigger from the rifle.
What's the difference between the Rough Diamond and the original Diamond?
The Rough Diamond is the refined evolution of the Diamond. TriggerTech doubled the minimum pull from under 4 oz to under 8 oz and adjusted the engagement geometry, which makes it more durable and forgiving under rough handling while keeping that same crisp, zero-creep break. It's a great fit for hunters and competitors who never used the ultra-light settings anyway.
Is the Rough Diamond hard to install?
Not at all. It's a drop-in design for compatible clone actions and installs with basic tools in a matter of minutes. Since it's a left-hand flat trigger, just confirm your action is set up for a left-hand configuration before dropping it in.




Reviews
There are no reviews yet.