Description
The TriggerTech Rem 700 Special Two-Stage brings TriggerTech's Frictionless Release Technology to shooters who want a defined first stage and a clean wall before the break. That roller-based sear system is what gives this trigger its signature feel, delivering a crisp, repeatable release without the drag you get from friction-based designs. Because the mechanism isn't relying on polished or lubricated engagement surfaces, the pull stays consistent shot after shot, even after thousands of rounds and in dirty or wet conditions.
Dialing In the Rem 700 Special
Pull weight adjusts from roughly 1 to 3.5 pounds using an externally accessible set screw, and both stages are tunable in about one-ounce increments. That means you can set a light, deliberate first stage and a crisp wall to suit target work, hunting, or long-range shooting without disassembling anything. Thanks to the exceptionally clean break, most shooters report the pull feeling lighter than a friction trigger set to the same measured weight. Keep in mind pull weights are affected by your firing pin spring, so an overweight spring can push the numbers past the listed range.
Built for the Long Haul
The housing is 7075 aluminum with a black anodized finish, and the key internal components are hardened 440C stainless steel wearing a PVD black coating for corrosion resistance and long service life. This is a right-hand model with a flat trigger lever and an integrated bolt release, and it drops into standard Remington 700 pattern actions.
Four Points of Safety
TriggerTech calls this the first Rem 700 trigger with four points of safety. A Ticker Blocker and Sear Blocker keep things locked while on safe, a First-Stage Lockout prevents first-stage movement so you get immediate confirmation the safety is engaged, and a First-Stage Safety keeps the ticker blocked even on fire until the first stage is actuated. It's backed by a lifetime warranty, and folks who've run it consistently point to the zero-creep break, easy adjustment, and clean machining as the standouts.
Key Specifications
- Manufacturer: TriggerTech
- MPN: R70-TCB-13-TBF
- UPC: 885768001656
- Model: Remington 700
- Style: Two-Stage Special
- Trigger Lever: Flat
- Pull Weight Range: 1 to 3.5 lbs, adjustable both stages
- First Stage: 8 to 24 oz
- Second Stage: 8 to 32 oz
- Bolt Release: Integrated
- Safety: With, removable, four points of safety
- Hand: Right only
- Overtravel: Sub .010 inch
- Housing: 7075 Aluminum, anodized black
- Key Components: 440C Stainless Steel, PVD Black
- Warranty: Lifetime
What’s Included
- TriggerTech Rem 700 Special Two-Stage Flat trigger with integrated bolt release
- Adjustment tool and instructions
Frequently Asked Questions
Will the Rem 700 Special two-stage drop into my rifle without gunsmithing?
Yes, it's a drop-in unit built for standard Remington 700 pattern actions. Most people find the swap straightforward with clear instructions, though budgeting a little extra time for removing your factory trigger the first time is smart. It's a right-hand model only.
How do I adjust the pull weight on this TriggerTech trigger?
Pull weight adjusts from about 1 to 3.5 pounds through an externally accessible set screw, and both stages can be tuned in roughly one-ounce increments. You don't need to disassemble the trigger to make changes. Keep in mind an overweight firing pin spring can push your actual pull weight above the listed range.
What makes the two-stage feel different from a single-stage trigger?
The two-stage gives you a defined first stage of take-up before you hit a crisp wall, then a zero-creep break at the second stage. Shooters who like some movement and confirmation before the shot breaks tend to prefer this setup. Both stages are independently adjustable so you can fine-tune the feel to your liking.
How reliable is the Frictionless Release Technology in rough conditions?
The roller-based sear system doesn't rely on polished or lubricated engagement surfaces, so it holds its pull consistency shot after shot and tolerates dirt and moisture well. The hardened 440C stainless internals with PVD coating add corrosion resistance and long service life. It's a common pick for hunting, competition, and harsh-environment use.




Reviews
There are no reviews yet.