Description
Anyone who has fumbled a disconnector spring across the workbench knows why a good fitting pin earns its keep. The Geissele Trigger Fitting Pin, part number 02-313, is a purpose-built tool for installing and removing AR-15 and AR-10/LR-308 fire control groups. It is machined to the exact diameter of the trigger and hammer pins, which is the whole trick behind why it works so smoothly. That precise fit lets it slide cleanly through the pin holes without slop, so you can tap out an existing trigger or keep a new one indexed while you drive the real pin home.
What the Geissele Fitting Pin Does on the Bench
Think of it as two tools in one. It acts as a punch to press or lightly tap out the pins already in your lower, and it serves as a slave pin to hold the trigger and disconnector together while you drop the assembly into the receiver. From there you use the actual trigger pin to push the fitting pin back out, keeping everything lined up the entire time. Geissele's own trigger instructions even call for doing initial fitting with this pin rather than the finish pins, since the supplied trigger pins are sized for a snug tap fit into the receiver.
Fit and Build of the 02-313 Fitting Pin
The pin measures 0.154 inches in diameter, matching standard small-pin AR trigger and hammer holes, and pairs a steel shaft with a rounded polymer handle you can grip and control. It is made in the USA and works across the AR-15 and AR-10 family of lowers. Folks who swap triggers regularly tend to keep one in the toolbox because it makes the job cleaner and cuts down on the odds of a spring launching itself into the carpet.
One thing worth knowing going in: because it is cut to the exact diameter of the pin holes, the fit is tight, so you want to stay centered when tapping out old pins. That snugness is exactly what makes it work, and once you have used one you will understand why it shows up in so many home armorer kits.
Key Specifications
- Manufacturer: Geissele Automatics
- Manufacturer Part Number: 02-313
- UPC: 854014005960
- Pin Diameter: 0.154 in
- Overall Length: 4.1 in
- Material: Steel shaft with polymer handle
- Color: Black
- Compatibility: AR-15 / AR-10 / LR-308 trigger and hammer pins
- Style: Fitting / slave pin
- Quantity: 1
- Country of Origin: USA
What’s Included
- 1 Geissele Trigger Fitting Pin (02-313)
Frequently Asked Questions
What does the Geissele Trigger Fitting Pin actually do?
It is a two-in-one tool for AR trigger work. As a punch it helps press or lightly tap the existing trigger and hammer pins out of your lower, and as a slave pin it holds the trigger and disconnector aligned while you install a new fire control group. You then use the real trigger pin to push the fitting pin back out, keeping everything indexed.
Does the fitting pin fit both AR-15 and AR-10 rifles?
Yes. The 02-313 is sized to standard small-pin trigger and hammer holes at 0.154 inches, so it works across the AR-15 and AR-10/LR-308 family of lowers. If your rifle uses standard small trigger and hammer pins, this pin will drop right in.
Do I need this pin to install a Geissele trigger, or can I use a regular punch?
You can technically swap a trigger with a plain punch and steady fingers, but the fitting pin makes it far easier and cleaner. Geissele's instructions recommend doing the initial fitting with this pin rather than the finish trigger pins, since those are sized for a snug tap fit into the receiver. It also helps keep springs from popping loose mid-install.
Why does the fitting pin feel so tight in the pin holes?
That snug fit is by design. The pin is machined to the exact diameter of the trigger and hammer pin holes, which is what lets it hold parts in perfect alignment. Just make sure you stay centered when tapping out old pins so it feeds through cleanly.





Reviews
There are no reviews yet.