Traditions Outfitter G3 Takedown 300 Blackout 16.5″ Rifle w/ Scope

Description

The Traditions Outfitter G3 Takedown is a break-action, single shot rifle chambered in .300 AAC Blackout, and it's built around the kind of simplicity that makes a lot of hunters happy. One cartridge, one shot, no magazines to fuss with. It wears a 16.5" Lothar Walther chromoly fluted barrel with a Cerakote finish, a black synthetic stock, and tips the scales right around 5.8 to 6.25 pounds on its own, which makes it a breeze to carry in and out of the woods.

What Makes the G3 Takedown Different

The standout here is the patented QD forend. Press the button on the underside and the forend releases, letting the barrel separate from the receiver so the rifle packs down short for a truck, a pack, or a closet corner. The muzzle is threaded 5/8×24, so you can run a suppressor, muzzle brake, or compensator. That threaded barrel plus the quiet nature of a single shot action makes this a popular setup for folks who like running subsonic .300 Blackout loads.

Trigger, Twist, and Accuracy

The Outfitter G3 runs the Elite XT trigger system with a rebounding hammer and a manual cross-bolt trigger block safety. One handy detail is that the action can be broken open with the safety engaged, so you can load, unload, or check the chamber without taking the safety off. The barrel has a 1:7" twist rate, an 11-degree target crown, and comes free-floated. That 1:7 twist stabilizes a wide range of bullet weights, so whether you're feeding it lighter supersonic loads or heavier subsonic rounds, it holds its own.

Glass Comes Included

This is the scope package, so it ships with a 3-9×40 scope that's mounted at the factory. The receiver is also drilled and tapped if you ever want to swap optics down the road. With its short barrel and .300 Blackout chambering, the G3 is a natural fit for whitetail and hog hunting inside moderate ranges, and the point of balance was shifted forward to suit smaller-framed hunters too.