Description
The TISAS Regulator 1911A1 is one of the more compelling options in the full-size 1911 market because it genuinely does something most pistols don't: it ships as a dual-caliber setup right out of the box. You get a dedicated 5-inch cold hammer-forged, ramped barrel and magazine for both 9mm and .38 Super, so there's no guesswork, no tracking down aftermarket parts, and no gunsmith visit required. Swap the barrel and magazine, and you're shooting a completely different cartridge on the same forged carbon steel frame and government-length slide. The high-polished chrome finish over forged steel looks sharp, and the Turkish walnut grips give it that timeless 1911 character.
What Makes the Regulator 1911A1 Worth a Second Look
Under the hood, the Regulator runs Series 70 internals, which is the configuration most 1911 fans prefer. Series 70 means no firing pin block safety cluttering up the trigger linkage, and the result is a cleaner, more direct trigger pull than what you get from Series 80-style designs. The titanium firing pin is a genuine spec-level upgrade, contributing to faster lock time and long-term durability. The frame also features a beavertail grip safety, which makes a real difference in comfort and control over extended range sessions compared to a bare GI-style grip tang. Slide serrations, a flat mainspring housing, and a round hammer round out the controls.
9mm vs. .38 Super on the Regulator Platform
The dual-caliber setup here makes practical sense. The 9mm configuration gives you access to cheap, widely available ammunition for range work, while .38 Super offers higher velocity and a cartridge that many consider better tuned to the 1911's original operating geometry. The Regulator's ramped barrel design supports reliable feeding in both configurations without frame modifications. Each caliber gets its own dedicated magazine, which matters because using a .38 Super magazine with 9mm ammunition can cause feeding issues. TISAS accounts for this properly by including one magazine per caliber.
The warranty situation is also worth knowing: TISAS backs the Regulator with a 1-year limited warranty covering defects in materials and workmanship, followed by a lifetime service plan for material defects. For a pistol at this price point with forged steel construction, that kind of support is reassuring.
Key Specifications
- Manufacturer: TISAS (SDS Imports)
- Model: 1911A1 Regulator
- MPN: 10100513
- UPC: 711500175654
- Action: Single-Action Semi-Auto
- Caliber: 9mm Luger / .38 Super (dual-caliber)
- Barrel Length: 5 inches
- Barrel Type: Cold Hammer-Forged, Ramped
- Frame: Forged Carbon Steel, Full-Size
- Slide: Forged Carbon Steel, Government Length
- Internals: Colt Series 70 Style
- Finish: High Polished Chrome
- Grips: Turkish Walnut
- Sights: Enhanced GI Style Iron Sights
- Capacity: 9+1 rounds
- Weight: 2 lbs 2 oz
- Firing Pin: Titanium
- Grip Safety: Beavertail
- Mainspring Housing: Flat
What’s Included
- TISAS Regulator 1911A1 pistol
- 5-inch 9mm barrel
- 5-inch .38 Super barrel
- One 9mm magazine (9-round)
- One .38 Super magazine (9-round)
- Lockable hard case
- Cleaning kit
- Barrel bushing wrench
- Trigger lock
- Instruction manual
Frequently Asked Questions
How does the caliber conversion actually work on the TISAS Regulator 1911A1?
Switching between 9mm and .38 Super requires swapping the barrel and the magazine. Both calibers use a ramped barrel design, which means the frame doesn't need any modification to support either setup. TISAS includes dedicated barrels and magazines for both calibers in the box, so everything you need is already there.
Why does the Regulator include a separate magazine for each caliber instead of sharing one?
The 9mm and .38 Super cartridges have slightly different case dimensions and feeding geometry, so dedicated magazines for each caliber are the reliable approach. Using a .38 Super magazine with 9mm ammunition can lead to feeding problems because the geometry isn't optimized for the smaller cartridge. The Regulator includes one magazine per caliber specifically to avoid this issue.
What are the advantages of Series 70 internals over Series 80 in the Regulator?
Series 70 internals omit the firing pin block safety that Colt introduced in the Series 80 design. That safety adds extra parts to the trigger linkage and is widely considered to make trigger pull heavier and less crisp. With Series 70 internals, the Regulator's trigger is more direct and typically feels cleaner, which is one of the reasons 1911 enthusiasts tend to prefer this configuration for both range work and competition.
Is the polished chrome finish on the Regulator durable for regular range use?
The Regulator uses a hard chromium coating process on the frame, slide, and barrel rather than a simple decorative plating. Hard chrome is well-regarded for corrosion resistance and surface hardness, which makes it more durable than it might look. That said, a high-polish finish will show handling marks more readily than a matte finish, so some regular cleaning and light maintenance will keep it looking its best.
Is .38 Super ammunition easy to find and is it worth using over 9mm?
.38 Super is a niche but widely stocked cartridge, available at most gun shops and online retailers, though it's more limited than 9mm and typically costs more per round. The cartridge generates higher velocity than standard 9mm loads and has a loyal following in IPSC and USPSA competition, where its power factor and flat-shooting characteristics are valued. For everyday range use, 9mm will be cheaper and easier to source, which is part of what makes the Regulator's dual-caliber capability genuinely useful.
What warranty comes with the TISAS Regulator 1911A1?
TISAS backs the Regulator with a 1-year limited warranty against defects in materials and workmanship from the original retail purchase date. Beyond that, the pistol is covered by TISAS's lifetime service plan, which addresses material defects for the life of the firearm. Both warranties are administered through SDS Arms, TISAS's U.S. importer.





Reviews
There are no reviews yet.