$14.99
11 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A bore guide is one of those quiet little tools that saves you from expensive mistakes. Run a rod down a bore without one and it can bow, flex, and drag against the throat and chamber over hundreds of strokes. Those are the exact spots that decide how well your rifle shoots. The Tipton Universal Bore Guide sits in the bolt position and holds the rod on a straight line from the breech, so every patch and brush tracks where it should and your barrel stays the way you paid for it.
The body is an anodized aluminum tube, which is what gives this thing its longevity. It shrugs off solvents and years of range-box abuse without corroding or wearing out like cheaper plastic guides. Cleaning with the rod aligned also directs your push straight down the barrel, so those tight patches you have to lean on go through with a lot less fight.
This is a full kit, not just a tube. You get three interchangeable tips that cover most cartridges from .17 all the way up to .460, plus a bolt-action collar and a separate AR-15 collar. The sliding collar for bolt guns adjusts back and forth for a snug fit and rotates down to lock into the bolt catch slot, and it works with bolt diameters of .695 inches or larger. It handles cleaning rods up to .425 inches in diameter, so it plays nice with just about any quality rod you already own.
Setup is about as simple as it gets. Snap on the tip that fits your rifle, pull the bolt and slide the guide in, then adjust the collar for a snug seat and tighten the thumbscrew. There's also an integrated solvent port up front that lets you add wet down the tube after the patch is loaded, keeping harsh cleaners headed into the bore instead of dripping back into the action and trigger group. One note worth remembering: pick your tip by the fit in the chamber, since chamber size doesn't line up one-to-one with bore diameter.
Yes, that's the whole idea behind the universal part. It ships with an adjustable sliding collar that locks into the bolt catch slot on bolt-action rifles, plus a separate AR-15 collar that seats securely inside the receiver of AR-style rifles. Between the two collars and the three tips, it covers most of what's in a typical safe.
The three tips break down into Small for roughly .17 to .24, Medium for .25 to .30, and Large for anything over .30. Keep in mind the tip seats in the chamber, and chamber dimensions don't line up exactly with bore diameter. Go by the tip that gives the snuggest fit in your chamber rather than matching it strictly to your bullet size.
It's an opening in the front of the guide that lets you add solvent down the tube after the patch is already loaded on the rod. The point is to keep cleaner flowing into the bore instead of spilling back into the action, where aggressive solvents can cause rust and gum up the trigger. Some folks just dip their patch in solvent instead, so use it however fits your routine.
It accepts cleaning rods up to .425 inches in diameter, which covers pretty much any standard quality coated or steel rod on the market. As long as your rod falls under that, it'll slide through and stay aligned from the breech to the muzzle.
| UPC | 661120778882 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 777888 |
| Product Type | Bore Guide |
| Shipping Weight | 0.42 |
| Units per Box | 1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.