Description
The Timber Creek 5.56 16" Medium Profile Barrel (TC556MED16) is a well-rounded replacement barrel built for AR-15 folks who want that classic 16-inch setup running a mid-length gas system. It pairs a 1:7 twist rate with M4 feed ramps and a durable black nitride finish, and every barrel is guaranteed to hold 1 MOA at 100 yards with the right ammo behind it. Chambered in 5.56 NATO, it also handles .223 Rem without any fuss.
Why the Mid-Length Gas System Works So Well on This Timber Creek Barrel
The mid-length gas system is the sweet spot for a 16-inch barrel. Moving the gas port farther down the tube stretches out the dwell time, which softens the recoil impulse and eases the pressure on internal parts compared to a carbine-length setup. The result is a smoother-cycling rifle that stays flatter between shots and tends to run cleaner over a long range day.
What You Get With the TC556MED16 Medium Profile Barrel
The medium profile is a smart middle ground. It carries more weight out front than a pencil barrel, which helps steady your hold and hangs onto heat a little longer during string-fire, but it won't drag your build down like a heavy bull barrel. Tipping the scales right around 31.6 ounces, it keeps things manageable whether you're building a range gun, a duty-style rifle, or an all-around AR-15.
Fitting the Timber Creek Mid-Length Barrel to Your Build
This barrel uses a .750" gas block seat and 1/2×28 muzzle threads, so it plays nice with the vast majority of common AR-15 parts on the market. You'll need a mid-length gas tube and a .750" gas block to complete the setup, and the barrel ships with a thread protector so your threads stay clean until your muzzle device shows up. Pair it with your favorite BCG and handguard and you're most of the way to a finished upper.
Key Specifications
- Manufacturer: Timber Creek Outdoors
- Manufacturer Part Number: TC556MED16
- UPC: 816397025577
- Model: Med 16
- Caliber: 5.56x45mm NATO
- Barrel Length: 16"
- Profile: Medium
- Gas System: Mid-Length
- Twist Rate: 1:7
- Feed Ramps: M4
- Muzzle Thread: 1/2×28
- Gas Block Seat: .750"
- Finish: Black Nitride
- Material: 416R Stainless Steel
- Weight: 31.6 oz
- Accuracy: 1 MOA Guaranteed
What’s Included
- Timber Creek 5.56 16" Medium Profile Mid-Length Barrel (Black Nitride)
- Thread Protector
Frequently Asked Questions
What do I need to finish building an upper with this Timber Creek mid-length barrel?
You'll need a mid-length gas tube and a .750" gas block to match the gas system, plus a bolt carrier group, handguard, and upper receiver. The 1/2×28 muzzle threads accept most common flash hiders, muzzle brakes, and compensators. A thread protector comes in the box, so your threads stay covered until you install a muzzle device.
Will the 1:7 twist handle both light and heavy 5.56 bullets?
Yes. The 1:7 twist is the same rate used on M4-style rifles and it stabilizes a wide range of loads, from lighter 55 grain up through heavier 62 to 77 grain projectiles. It's a versatile choice if you shoot a mix of ammo or want to run heavier match bullets.
Can I shoot .223 Remington in this 5.56 barrel?
You can. Because the chamber is cut for 5.56 NATO, it safely handles both 5.56 and the lower-pressure .223 Remington. That flexibility makes ammo sourcing a lot easier.
Why go mid-length instead of carbine-length gas on a 16" barrel?
The mid-length gas system spreads out the pressure curve, which gives you a softer recoil impulse and less wear on your rifle's internals compared to carbine gas. It's widely considered the ideal pairing for a 16-inch barrel and one of the main draws of this Timber Creek setup.



Reviews
There are no reviews yet.