Description
If you're setting up a scope on your Tikka 695, this EGW base takes the guesswork out of the equation. It's a one-piece Picatinny rail cut specifically for the 695 receiver, so the fit is tight and the slots line up where they should. EGW machines these from domestic 6061 T6 extruded aluminum, then tumbles, sandblasts, and Type II anodizes each one for a tough matte black finish that holds up to years of range time and field use.
The 0 MOA cant means there's no built-in forward angle, which is what you want for standard hunting and shooting distances. EGW suggests the 0 MOA base for work inside 500 yards, while the 20 MOA version is geared toward longer reach. Picatinny cross slots run the full length of the rail, giving you plenty of room to position your rings exactly where you need them for proper eye relief. The center channel trims weight down to around two ounces, so you're not adding bulk to a rifle built to be carried.
Why the Tikka 695 Mount Fits So Well
This isn't a universal base bent to fit. It's made to the 695's specific footprint with a 4.035 inch center spread and a 7.458 inch overall length. Worth noting up front: this mount is cut for right-hand eject rifles only, so make sure your 695 is a right-hand model before ordering. In many setups the low profile also leaves factory iron sights usable.
Getting Your Tikka 695 Rail Dialed In
Installation is straightforward. The base ships with the #6-48 mounting screws and a T-10 bit, and EGW recommends torquing to around 20 inch-pounds with a drop of blue thread locker to keep everything locked down under recoil. Pair it with a set of quality Picatinny or Weaver rings and you've got a clean, dependable optic platform ready for your next hunt or match.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Model: Tikka 695
- MPN: 44040
- UPC: 841370106240
- Cant: 0 MOA
- Rail Type: One Piece Picatinny
- Material: 6061 T6 Extruded Aluminum
- Finish: Matte Black Type II Anodized
- Center Spread: 4.035 inches
- Overall Length: 7.458 inches
- Height: 0.4 inch (top of receiver to top of rail)
- Weight: Approximately 2 oz
- Fitment: Right-hand eject Tikka 695 only
- Ring Compatibility: Picatinny or Weaver rings
- Color: Black
- Made In: USA (Quakertown, PA)
What’s Included
- EGW Tikka 695 Picatinny rail base (0 MOA)
- #6-48 x 1/4 mounting screws
- T-10 bit
Frequently Asked Questions
Will this EGW rail fit my left-hand Tikka 695?
No. This mount is machined specifically for right-hand eject Tikka 695 rifles only. If you have a left-hand model, this base won't line up correctly, so confirm your rifle's configuration before ordering.
Should I get the 0 MOA or the 20 MOA version?
The 0 MOA base is the right pick for standard hunting and shooting inside about 500 yards since it has no built-in forward cant. The 20 MOA version is better suited for long-range work out toward 1000 yards, where that extra elevation adjustment helps you stay on target. For most 695 owners, the 0 MOA covers the vast majority of use.
What rings do I need to run with the Tikka 695 Picatinny rail?
This is a true Picatinny-style base, so it works with any Picatinny or Weaver scope rings. Pick your ring height based on your scope's objective diameter and desired cheek weld. EGW's own Practical or HD rings pair up nicely if you want a matched setup.
Does the mount come with everything I need to install it?
Yes. It ships with the #6-48 mounting screws and a T-10 bit so you can get it on the receiver right away. EGW recommends torquing to about 20 inch-pounds and adding a drop of blue thread locker to keep things secure under recoil.





Reviews
There are no reviews yet.