Description
The Taurus TX22 is one of the better rimfire pistols out there for the money, but that stock polymer trigger tends to be the weak link. It's got a lot of slack, then a break, then a long trip back to reset. The TANDEMKROSS Victory Trigger fixes that. It's a flat-faced, skeletonized shoe machined from aerospace aluminum that swaps out the plastic factory trigger and instantly wakes up the feel of the gun. The flat face lets you pull straight back and encourages you to place your finger lower for extra leverage, which makes the pull feel lighter than it measures.
What the Victory Trigger Does for Your TX22
The big draw here is adjustability. The trigger comes with pre-travel and post-travel adjustment screws, so you can shorten the slack up front and tighten the reset out back until the pull is short, crisp, and repeatable. Paired with the TANDEMKROSS lightened trigger spring, plenty of owners have taken their pull from around 4.5 pounds with a two-stage feel down to a clean single-stage break in the low 2-pound range. Run the shoe by itself with the factory spring and you'll still get the flat face and the tuning screws, just with a smaller drop in weight.
Built to Take a Beating at the Range
The aggressive texturing on the face gives you a no-slip grip whether your hands are sweaty, cold, or wet, so it holds up in match conditions and long plinking sessions alike. Aluminum construction keeps it light without giving up durability, and TANDEMKROSS backs it against mechanical failure for life.
Easy Enough for a Home Install
This is a drop-in style upgrade. You field-strip the pistol, drift the trigger pin, swap the shoe, reinstall the pin, and set your travel screws. TANDEMKROSS has a full install video that walks you through it, and most folks report finishing the whole job in around 30 minutes on the kitchen table. It fits the standard TX22 along with the Compact and Competition frames, so whether you're building a Steel Challenge race gun or just tired of the stock feel, this is the go-to first mod.
Key Specifications
- Manufacturer: TANDEMKROSS
- Manufacturer Part Number: TK31N0472BLK1
- UPC: 769498486672
- Fits: Taurus TX22 (Standard, Compact, Competition)
- Caliber Platform: .22 Long Rifle
- Material: Aerospace Aluminum
- Trigger Shape: Flat-Faced, Skeletonized
- Finish: Textured Black
- Adjustability: Pre-Travel and Post-Travel Screws
- Weight: Approx. 1 oz
- Warranty: TANDEMKROSS Lifetime Guarantee
What’s Included
- Victory Trigger shoe
- Trigger pin
- Pre-travel and post-travel adjustment screws
- Allen key
- Installation instructions
Frequently Asked Questions
Is the Victory Trigger a drop-in install for the TX22?
Yes, it's a straightforward drop-in style swap. You field-strip the pistol, drift out the trigger pin, drop in the new shoe, reinstall the pin, and set your travel screws. TANDEMKROSS has a step-by-step install video, and most owners finish the job in about 30 minutes with basic tools.
How much does the Victory Trigger lighten the pull weight?
On its own, the trigger mainly changes the feel and geometry rather than dropping a ton of weight. If you want a real reduction, pair it with the TANDEMKROSS lightened trigger spring. Owners running both commonly report going from roughly 4.5 pounds down to a crisp break in the low 2-pound range.
Will this Victory Trigger fit my TX22 Competition or Compact?
It does. The trigger is designed to fit the standard Taurus TX22 along with the Compact and Competition frames. If you're unsure about your specific model, the install video covers the common TX22 frames.
Why go flat-faced instead of a curved trigger?
The flat face lets you pull straight back and gives you clearer feedback if your finger is drifting left or right. It also lets you place your finger lower on the shoe for more leverage, which makes the pull feel lighter and more consistent shot to shot.





Reviews
There are no reviews yet.