Description
Talley's one-piece scope mount takes the guesswork out of setting up your Browning X-Bolt. Instead of fussing with a separate base and rings that can drift out of alignment, this unit combines the ring and base into a single machined piece. That means a rock-solid, repeatable connection between your optic and your rifle, and one less thing to second-guess when you're zeroing. This particular model is the 30mm, medium-height version in smoked bronze, built for short and super short action X-Bolts, with 20 MOA of angle built right into the rings.
What the 20 MOA Buys You on the X-Bolt
The 20 MOA slope is the real story here. By tilting the mount forward, it gives your scope a head start on elevation, so you've got more usable travel in your turret before you top out. For anyone stretching their X-Bolt out past comfortable zero range, that extra cushion is what lets you keep dialing instead of running out of adjustment at the worst possible moment. If you mostly shoot inside a couple hundred yards, the 20 MOA won't hurt a thing, but it really shines when the distances open up.
Built Light and Ready to Run
Talley machines these from aircraft-grade aluminum, so you get serious rigidity without piling weight onto a rifle you're carrying all day. They're cut to tight tolerances and require no lapping, which means you can pull them out of the package and mount your scope the same afternoon. The smoked bronze finish pairs nicely with X-Bolt rifles wearing similar earth-tone and bronze Cerakote treatments, giving your setup a clean, matched look.
Fit and Setup Notes
Installation uses a T-15 Torx, and Talley's published spec for the alloy ring cap screws runs 17 to 20 inch-pounds. A dab of blue threadlocker on the base screws is a smart move, though it's best left off the ring caps. Medium height suits most standard and mid-sized objectives, clearing the barrel with room to spare on the majority of X-Bolt builds.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: SB740735SM
- UPC: 810301024991
- Fits: Browning X-Bolt, Short/Super Short Action
- Ring/Tube Diameter: 30mm
- Ring Height: Medium
- Built-In Elevation: 20 MOA
- Design: One-Piece Integrated Ring and Base
- Material: Aircraft-Grade Aluminum
- Finish/Color: Smoked Bronze
- Front Height: 0.540 in
- Rear Height: 0.642 in
- Weight (per set): 2.5 oz
- Hardware: 6-48 Screws, T-15 Torx
- Country of Origin: USA
What’s Included
- Talley one-piece 30mm 20 MOA scope mount (set)
- Mounting screws (6-48)
Frequently Asked Questions
Will this Talley mount fit my Browning X-Bolt?
This set is built specifically for Browning X-Bolt rifles with short and super short actions. It also fits the X-Bolt 2 since those share the same X-Lock mounting pattern. If you have a long or magnum action X-Bolt, you'll want the long/magnum version instead, since the 20 MOA mounts are action-length specific.
What does the 20 MOA on this X-Bolt scope mount do?
The 20 MOA is a built-in forward tilt that gives your scope extra elevation to work with. This lets you dial up for longer-range shots before you run out of travel in your turret. For shorter-range hunting it won't cause any issues, but it's a big help once you start reaching out there.
Do I need to lap these Talley rings before mounting my scope?
No. Talley machines these to tight tolerances so they're ready right out of the package, and lapping isn't required. In fact, lapping them voids the warranty, so just mount your scope and go.
What tool and torque do I need to install this mount?
You'll need a T-15 Torx bit, and a longer 2-inch shank version makes life easier if you're using a torque wrench on the base screws. Talley lists 17 to 20 inch-pounds on the alloy ring cap screws. A drop of blue threadlocker on the base screws is a good idea, but leave it off the ring caps.



Reviews
There are no reviews yet.