$9.99
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The TacFire MAR092 is a standard-length AR-15 charging handle built to the same footprint you already know from any GI or factory upper. It's CNC machined from 6061-T6 aircraft-grade aluminum, fitted with a steel latch, and finished in black hardcoat anodizing that shrugs off wear and holds up to regular cycling. At 6.875 inches long and right around 1.1 ounces, it drops straight in with no gunsmithing, no fitting, and no fuss.
There's a reason the mil-spec pattern has stuck around for decades. It's light, it's simple, and there are no extra snag points or added parts to fail. This one gives you a clean lockup, lets you rack the bolt or hold it open, and stays out of the way when you're running irons or a low-mounted red dot. If your factory handle got beat up or you just want a fresh spare in the range bag, the MAR092 covers that ground without overcomplicating things.
Because it follows the mil-spec dimensions, this handle installs in any standard AR-15 or M16-pattern upper receiver chambered in .223 Rem / 5.56 NATO. Swapping it is one of the easiest jobs on the platform: pull your old handle, slide this one in, and you're back in business in a couple of minutes. The steel latch adds a bit of strength where the small pivot pin takes its stress, which is a nice touch on a part that gets grabbed and yanked more than most.
Bottom line, this is a no-drama replacement or spare for the right-handed shooter running a straightforward setup. If you eventually want an extended latch or a full ambi setup for use under a big magnified optic, that's a different animal, but for a solid stock-style handle that just works, the MAR092 gets it done.
Yes, as long as you have a standard AR-15 or M16-pattern upper receiver chambered in .223 Rem or 5.56 NATO. It follows the mil-spec 6.875-inch dimensions, so it drops into the charging handle channel just like your factory part. It is not sized for AR-10 or .308 uppers, which use a physically larger handle.
Not at all. It's one of the simplest jobs on the AR platform and requires no gunsmithing or special tools. You pull your existing handle out of the upper, slide the MAR092 in the same way, and you're finished in a couple of minutes.
No, this is a standard mil-spec handle with a single latch on the left side, which works well for right-handed shooters running irons or a low-mounted optic. If you're left-handed or running a large magnified optic that crowds the latch, an ambidextrous or extended-latch handle would suit you better. For a straightforward stock-style replacement or spare, the MAR092 fits the bill.
The latch is the small piece you press to release the handle, and it takes repeated stress from being grabbed and pulled. A steel latch holds up better over time than some softer materials, giving you a more durable lockup on a part that gets a lot of handling.
| UPC | 811261023437 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MAR092 |
| Model | |
| Product Type | Charging Handle |
| Shipping Weight | 0.092 |
You must be logged in to post a review.
Reviews
There are no reviews yet.