0
0

Smith & Wesson M&P9 M2.0 Metal OR 9mm 4.25″ Tungsten Gray 17+1

UPC: 022188884951

$848.99

5 in stock

Online inventory may differ from in-store availability.

NOTICE: This item is subject to shipping times of 10-12 days due to brand shipping logistics.

Fast Order Processing

Orders are processed quickly so your item gets moving as soon as possible.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Smith & Wesson took the proven M&P9 M2.0 and swapped the polymer frame for machined 7075-T6 aluminum, and the result is one of the most satisfying pistols in the M&P lineup. At around 30 ounces, it carries a bit more heft than its polymer sibling, and that extra rigidity pays off downrange. Less frame flex means less torque when the gun cycles, so the sights settle back on target quicker and follow-up shots come easier. The full Tungsten Gray Cerakote treatment on both the frame and stainless steel slide gives it a clean, businesslike look that stands apart from the sea of black pistols in the case.

What Makes the M&P9 M2.0 Metal Worth a Look

The trigger is where this gun really earns its keep. The M2.0 flat-face trigger paired with an enhanced sear delivers a short take-up, clean break, and a crisp, tactile reset. The 18-degree grip angle points naturally, the low bore axis keeps muzzle rise in check, and the aggressive M2.0 grip texture locks into your hand without chewing it up. Four interchangeable palmswell inserts in sizes S, M, ML, and L let you dial in the fit and trigger reach, whether you have small hands or catcher's mitts. A wide slide stop, reversible magazine release, and forward slide serrations round out the controls, and there is no thumb safety to fumble with under pressure.

Optics Ready Out of the Box

The slide comes cut for red dots, so mounting your favorite micro optic is a simple job rather than a trip to the machinist. Until then, the steel white dot sights handle business just fine. The 4.25 inch stainless barrel wears an Armornite finish and a 1:10 twist that shoots accurately with a wide range of 9mm loads.

A Smart Buy in the M2.0 Metal Family

Since it is built on the standard M&P platform, this pistol accepts existing M2.0 full-size magazines, holsters, and palmswells, so upgrading from a polymer M&P will not orphan your gear. With 17+1 capacity, two magazines in the box, and Smith & Wesson's lifetime service policy behind it, this one works equally well as a range gun, home defense pistol, or duty-style sidearm.

Key Specifications

  • Manufacturer Part Number: 13194
  • UPC: 022188884951
  • Caliber: 9mm Luger
  • Capacity: 17+1
  • Action: Striker Fired Semi-Auto
  • Barrel Length: 4.25 in, 1:10 RH twist
  • Barrel Material: Stainless Steel with Armornite Finish
  • Frame Material: 7075-T6 Aluminum
  • Slide Material: Stainless Steel, Optic Cut and Serrated
  • Finish: Tungsten Gray Cerakote
  • Sights: Steel White Dot Front, White 2-Dot Rear
  • Overall Length: 7.4 in
  • Weight: 30 oz
  • Thumb Safety: None
  • Grip: 4 Interchangeable Palmswell Inserts (S, M, ML, L)
  • Accessory Rail: Picatinny-Style

What’s Included

  • S&W M&P9 M2.0 Metal OR pistol
  • Two 17-round magazines
  • Four interchangeable palmswell grip inserts (S, M, ML, L)
  • Owner's manual

Frequently Asked Questions

Will my existing M&P M2.0 holsters and magazines work with the M&P9 M2.0 Metal?

Yes, and that is one of the best things about this pistol. It is built on the standard full-size M&P platform, so it is compatible with M2.0 full-size magazines, holsters, and palmswell inserts. If you are moving over from a polymer M&P9, most of your gear carries right over.

What red dot optics fit the M&P9 M2.0 Metal OR slide?

The slide comes factory cut for micro red dots and accepts popular footprints using the included mounting hardware setup, similar to S&W's C.O.R.E. optic system. Common choices include optics on the RMR and Shield RMSc style footprints depending on the plate used. Check your optic's footprint against the plate kit before ordering.

How much heavier is the Metal version compared to the polymer M&P9 M2.0?

The M2.0 Metal weighs in at about 30 ounces unloaded, roughly 5 ounces more than the polymer full-size. That added weight from the 7075-T6 aluminum frame soaks up recoil and reduces muzzle flip, which most people notice right away in faster, flatter follow-up shots. It is still light enough for all-day carry on a good belt.

Does the S&W M&P9 M2.0 Metal have a manual thumb safety?

No, this model (SKU 13194) ships without a thumb safety, which many prefer for defensive use since there is nothing extra to disengage under stress. It still uses the M&P's internal safety systems, and the takedown lever with sear deactivation lets you field strip it without pulling the trigger.

Additional information

UPC

022188884951

Manufacturer

Manufacturer Part Number

13194

Action

ATF Type

Pistol

Barrel Length

4.25''

Caliber/Gauge

9mm

Capacity

17+1

Color

GREY

Length

7.4''

Magazine Included

2 x 17-Round

Model

Number of Magazines

2 17 rd.

Package Height

2.4

Package Width

7.0

Product Type

Striker Fired

Safety

No

Shipping Weight

2.9

Sights

White Dot

Sights Type

3-Dot White

Slide Description

Optic Ready/Serrated

State Restriction (CA)

NO DIRECT SHIP TO CALIFORNIA

State Restriction (Guam)

NO SALE TO GUAM

State Restriction (IL)

NO SALE TO ILLINOIS PICA

State Restriction (OR)

NO SALE TO OREGON

State Restriction (PR)

NO SALE TO PUERTO RICO

State Restriction (RI)

NO DIRECT SHIP TO RHODE ISLAND

State Restriction (VI)

NO SALE TO VIRGIN ISLANDS

State Restriction (WA)

NO DIRECT SHIP TO WASHINGTON

Units per Box

1

Reviews

There are no reviews yet.

Be the first to review “Smith & Wesson M&P9 M2.0 Metal OR 9mm 4.25″ Tungsten Gray 17+1”