Description
There is a reason you see this three-prong design on so many hard-use rifles. The SureFire SF3P-556-1/2-28 cuts muzzle flash by more than 99% compared to a bare muzzle, which makes a real difference on short barrels and during low-light work where a fireball can wash out your night vision. It threads onto any 5.56 NATO or .223 barrel with standard 1/2×28 muzzle threads, so it drops right onto most AR-15, M4, and M16 pattern rifles without permanent modification.
Built Like a SureFire Should Be
Each SF3P is machined from US mill-certified, heat-treated stainless steel bar stock with single-point cut threads for a clean, true fit on your barrel. The black Ionbond DLC coating shrugs off carbon, corrosion, and gas erosion, and it wipes clean far easier than a bare steel device after a long range day. The tines are noticeably beefier than the old A2-style prongs, and every unit gets inspected for concentricity and alignment before it leaves the factory. SureFire backs it with their No-Hassle Guarantee.
More Than a Flash Hider, It's Your Suppressor Mount
Here is where this device earns its keep. The SF3P serves as the mounting adapter for all SureFire SOCOM Series 5.56 Fast-Attach suppressors, including the SOCOM556-RC that came out on top in the famously brutal USSOCOM suppressor trials. Multiple bearing surfaces keep the can aligned dead straight and stop the tines from ringing inside the suppressor, while a rear labyrinth seal fights carbon buildup in the indexing system so the can comes off cleanly even after extended firing.
Is the SF3P-556-1/2-28 Right for Your Build?
If you run a SureFire SOCOM can, or plan to, this is the mount to have on every 1/2×28 host in the safe. And even as a standalone flash hider, the flash reduction and build quality justify the spot on your muzzle. One thing worth knowing: SOCOM Series mounts are not cross-compatible with SureFire's older pre-SOCOM Fast-Attach suppressors, so match generations accordingly.
Key Specifications
- Manufacturer: SureFire
- Manufacturer Part Number: SF3P-556-1/2-28
- UPC: 084871319119
- Model: SOCOM 3-Prong Flash Hider
- Caliber: .223 Rem / 5.56 NATO
- Thread Pattern: 1/2×28
- Material: US mill-certified heat-treated stainless steel
- Finish: Black Ionbond DLC
- Flash Reduction: Typically greater than 99% vs. bare muzzle
- Suppressor Compatibility: All SureFire SOCOM Series 5.56/.223 Fast-Attach suppressors
- Fits: AR-15, M4, M16 and variants with 1/2×28 muzzle threads
- Color: Black
- Weight: Approx. 0.335 lb shipping weight
What’s Included
- SureFire SF3P-556-1/2-28 3-prong flash hider / suppressor adapter
Frequently Asked Questions
Will the SF3P-556-1/2-28 fit my AR-15?
If your barrel has standard 1/2×28 muzzle threads, which covers the vast majority of 5.56 and .223 AR-15, M4, and M16 pattern barrels, it will thread right on. No permanent modification to the rifle is needed. Just make sure you install it with a proper crush washer or shim kit and torque it correctly.
Which suppressors mount on the SureFire SF3P flash hider?
It mounts all SureFire SOCOM Series 5.56mm/.223 Fast-Attach suppressors, including the SOCOM556-RC2 and RC3. Keep in mind it is not compatible with SureFire's older pre-SOCOM Fast-Attach cans, so if you are running a legacy suppressor you will need the matching older mount.
Do three-prong flash hiders ring like a tuning fork?
Some prong-style devices will ping when bumped, and the SF3P can produce a faint tone unsuppressed like most designs of this type. The bigger point is that its multiple bearing surfaces prevent the tines from ringing inside a mounted suppressor, which was a common complaint with older prong mounts. With a can installed, it runs quiet and stays aligned.
Is this worth running even if I do not own a suppressor yet?
It works great as a standalone flash hider, cutting flash by more than 99% compared to a bare muzzle, which really matters on shorter barrels and in low light. Plenty of folks install it now and add a SOCOM Series can later since the mount is already in place. That future-proofing is a big part of why it shows up on so many duty rifles.




Reviews
There are no reviews yet.