Description
The ProTac Rail Mount HL-X Pro USB is Streamlight's answer to the age-old question of how to get serious throw out of a light that stays low and lean on your handguard. It runs 1,000 lumens on high with 50,000 candela, which translates to a 447-meter beam that reaches well past what most rifle setups will ever need. Drop it to the 60-lumen low mode and you've got a much softer 111-meter throw that won't blow out your night vision when you're working up close.
The real trick here is the beam quality. Lumens tell you total output, but candela is the punch that lets the beam cut through darkness and fight ambient light. This one is bright with intensity, not just floody, so it does a good job of both filling a room and pushing down a hallway or across a yard. The body is machined from 6000 series aircraft aluminum with a Type II MIL-Spec anodized finish, and the Borofloat glass lens is impact and temperature rated. It carries an IP67 waterproof rating and shrugs off a 2-meter impact, which is about what you'd expect from a Streamlight that's meant to live on a working gun.
Running the ProTac HL-X Pro USB Your Way
Power is flexible. You can run the included SL-B26 USB rechargeable battery pack for up to 1.75 hours on high and around 24 hours on low, or drop in two CR123A lithium cells when you can't get to a charger. That multi-fuel setup means you're never stuck. TEN-TAP programming lets you pick between three operating setups: high/strobe, high only, or low/high, so you can build the light around how you actually use it instead of scrolling through modes you'll never touch.
Switching and Mounting the ProTac Rail Mount HL-X Pro
The Jack-Cap tail cap is the standout. It gives you a push-button switch right on the light plus a port for the included remote pressure pad, so you get switch redundancy without adding bulk. The integrated rail clamp locks straight onto Picatinny, and the included M-LOK mount handles M-LOK handguards. Folks who've run it report it sits rock solid on an M-LOK rail and stays put through recoil, which is exactly what you want from a duty-grade light.
Key Specifications
- Manufacturer: Streamlight
- Model: ProTac Rail Mount HL-X Pro USB
- MPN: 88127
- UPC: 080926881273
- High Output: 1,000 lumens; 50,000 candela; 447m beam distance
- Low Output: 60 lumens; 3,100 candela; 111m beam distance
- Runtime (SL-B26): 1.75 hrs high / 24 hrs low
- Runtime (CR123A): 1.25 hrs high / 21 hrs low
- Power Source: SL-B26 USB rechargeable pack or (2) CR123A
- Switching: Jack-Cap tail cap, push-button and remote pressure switch
- Programming: TEN-TAP (high/strobe, high only, low/high)
- Mounting: Picatinny integrated clamp, includes M-LOK mount
- Body Material: 6000 series aircraft aluminum, Type II MIL-Spec anodized
- Waterproof Rating: IP67
- Length: 5.43 in
- Weight: 6.6 oz (with CR123A) / 7.2 oz (with SL-B26)
What’s Included
- ProTac Rail Mount HL-X Pro USB light
- Jack-Cap tail cap
- M-LOK mount kit
- Straight momentary remote pressure switch
- Hardware kit
- 2.5mm Allen wrench
- SL-B26 USB rechargeable battery pack
- 40-inch USB cord
Frequently Asked Questions
Does the ProTac HL-X Pro USB come with the rechargeable battery?
Yes. This system kit includes the SL-B26 USB rechargeable lithium-ion battery pack along with a 40-inch USB charging cord. You can also run it on two CR123A lithium batteries if you'd rather use disposable cells or need a backup power option in the field.
Will the HL-X Pro USB mount to both M-LOK and Picatinny rails?
It does. The integrated rail clamp attaches directly to MIL-STD 1913 Picatinny rails, and the included M-LOK mount lets you run it on M-LOK and M-LOK-compatible handguards. Users report it locks down solid and holds zero to the rail through recoil.
How far does the ProTac HL-X Pro USB actually throw?
On high it puts out 1,000 lumens and 50,000 candela for a rated beam distance of 447 meters. That candela number is what gives the beam its punch, letting it reach out and cut through ambient light rather than just flooding the area up close. Drop to the 60-lumen low mode and you get a gentler 111-meter throw for tasks that don't need the full output.
What does the Jack-Cap tail switch do differently?
The Jack-Cap gives you a push-button switch built right into the tail cap plus a port to plug in the included remote pressure pad. That means you get switch redundancy without adding a bulky bezel, so you can run whichever activation style fits your setup. TEN-TAP programming also lets you choose between high/strobe, high only, or low/high mode setups.







Reviews
There are no reviews yet.