Description
The Streamlight ProTac HP-X Pro is built for one thing: reaching way out there. With 800 lumens backed by 105,000 candela, this rail-mounted light drives a focused beam roughly 648 meters downrange, which is the kind of reach that lets you identify what's moving at the far edge of a field or a long shooting lane. That high-candela punch also cuts through smoke, fog, and haze that would wash out a floodier light.
This is the 89018 configuration, which is the light-only setup. It comes with the Jack-Cap tail cap switch and the M-LOK mount but skips the remote pressure switch, so it's the pick if you'd rather run the tail cap or add your own remote later. The Jack-Cap gives you push-button control right at the rear and leaves a port open for a remote switch down the road.
Powering the ProTac HP-X Pro Your Way
Streamlight went multi-fuel here, and it's a genuinely handy feature. The included SL-B26 rechargeable battery pack has a built-in USB-C charge port, so you pop the cell out and plug the cable straight into it, no cradle needed. If you run the pack dry away from an outlet, you can drop in two CR123A lithiums and keep going. On high you'll see around 2 hours of runtime with the SL-B26, and dialing down to the 55-lumen low mode stretches that way out for longer tasks.
Mounting the ProTac HP-X Pro on Long Guns
The body is machined from 6000-series aluminum with an anodized finish and a gasket-sealed lens, so it holds up to recoil and rough handling. It clamps directly to MIL-STD-1913 Picatinny rails and includes an M-LOK mount for forends set up that way, covering most rifles, carbines, and subguns. Streamlight's TEN-TAP programming lets you set the switching between high/strobe, high-only, or low/high depending on how you like to run it. Add the IPX7 water rating and 2-meter impact resistance and you've got a light that earns its spot on a working long gun.
Key Specifications
- Max Output: 800 lumens
- Peak Beam Intensity: 105,000 candela
- Beam Distance: 648 meters
- Low Output: 55 lumens / 7,600 candela
- Runtime (High): 2 hrs (SL-B26) / 1.5 hrs (CR123A)
- Battery: SL-B26 rechargeable pack or (2) CR123A
- Charging: USB-C via battery pack
- Switch: Jack-Cap push-button tail cap
- Mount Type: MIL-STD-1913 Picatinny / M-LOK
- Water Rating: IPX7
- Impact Resistance: 2 meters
- Body Material: 6000-series machined aluminum, anodized
- Color: Black
- Model: ProTac Rail Mount HP-X Pro
- Manufacturer Part Number: 89018
- UPC: 080926890183
What’s Included
- ProTac Rail Mount HP-X Pro light
- Jack-Cap tail cap switch
- M-LOK mount
- SL-B26 rechargeable battery pack
- USB-C charging cord
- Mounting hardware and Allen wrench
Frequently Asked Questions
Does the 89018 ProTac HP-X Pro come with a remote pressure switch?
No, the 89018 is the light-only configuration. It ships with the Jack-Cap push-button tail cap and the M-LOK mount but does not include a remote pressure switch. If you want the version with the momentary remote switch already in the box, that's the 89016.
What batteries does the ProTac HP-X Pro use?
It's a multi-fuel light. It comes with one SL-B26 rechargeable battery pack that charges over USB-C, and it will also run on two CR123A lithium cells if you'd rather use disposables in the field. That flexibility means you're never stuck without a power option.
Will this light mount to both Picatinny and M-LOK rails?
Yes. The light clamps directly to MIL-STD-1913 Picatinny rails out of the box, and the included M-LOK mount lets you attach it to M-LOK forends. That covers most modern rifles, carbines, and submachine guns.
How far will the ProTac HP-X Pro actually reach?
With 105,000 candela behind the beam, it throws light out to roughly 648 meters, which is well over 2,000 feet. That high-candela design also helps the beam punch through smoke and fog rather than reflecting back at you, making it a strong choice for long-distance target identification.





Reviews
There are no reviews yet.