Description
The Strike Industries TRIBUS Enhanced Castle Nut and Extended End Plate is one of those small upgrades that punches way above its size. It swaps out the plain castle nut and flat end plate on the back of your AR lower with a matched pair that solves two of the most common annoyances on the platform: castle nuts that walk loose over time, and QD sling swivels that dig into the web of your hand. Finished in a red hardcoat anodize, it also gives the rear of your build a clean pop of color that plays nicely with matching accent parts.
What Sets the TRIBUS Castle Nut Apart
The headliner here is the anti-rotation design. Instead of staking your castle nut, which permanently mars the part and makes future work a headache, the TRIBUS uses a threaded set screw system. Once the nut is torqued down, you thread the screw and it locks everything in place. If you ever need to take things apart down the road, you just back the screw out and loosen the nut. No drama, no destroyed hardware. The steel castle nut is lengthened to match the extended end plate, so it covers more of the buffer tube threads for a more supported, finished look.
Three QD Points on the Extended End Plate
This version adds two QD sockets to the left and right of the end plate on top of the original center position, giving you three mounting options total. The mounts sit pushed back away from your hand, which cuts down on that sharp pinch you get running a sling off a standard flat end plate during quick manipulations. Whether you shoot right or left handed, or just want to reposition your sling, you have room to work.
A couple of practical notes for install. You want a minimum receiver extension thread length of about 30mm, and you should not exceed 35 ft-lbs of torque on the castle nut. Because the assembly is extended, most stocks will lose their fully collapsed position to make clearance for the QD socket. It works on both AR-15 and LR-308 style lowers, and folks running everything from carbine builds to pistol setups have had good luck with it.
Key Specifications
- Manufacturer: Strike Industries
- Manufacturer Part Number: ARTRIBUSRED
- UPC: 708747548631
- Color: Red
- Finish: Hardcoat Anodized
- Version: Version 2
- QD Mounting Points: 3 (center, left, right)
- Castle Nut Material: Steel
- Anti-Rotation: Set screw lock, no staking required
- Platform Compatibility: AR-15 / LR-308
- Minimum Thread Length: 30mm (1.18 in)
- Max Castle Nut Torque: 35 ft-lbs
- End Plate Weight: 1.34 oz
What’s Included
- 1x Extended castle nut
- 1x Extended end plate
- 2x M3x12mm set screw
- 1x 1.5mm hex key
- 1x Warning card
Frequently Asked Questions
Do I still need to stake the TRIBUS castle nut?
No, and that is the whole point. The TRIBUS uses a threaded set screw to lock the castle nut in place, which replicates the security of staking without permanently damaging the part. If you ever need to disassemble, you just back out the screw and loosen the nut.
How many QD sling points does the TRIBUS end plate have?
Three total. There is one in the center plus two more on the left and right sides of the extended end plate. The mounts sit rearward of your hand to keep the sling swivel from pinching your skin during manipulations.
Will the TRIBUS work with my collapsible stock?
Yes, it fits standard AR-15 and LR-308 lowers with a compatible receiver extension. Keep in mind that because the castle nut and end plate are extended, most stocks lose their fully collapsed position to make room for the QD socket. You will also want at least 30mm of thread length on your buffer tube.
Is installation on the TRIBUS castle nut difficult?
Not at all if you have done a standard castle nut before. You torque the nut to no more than 35 ft-lbs with an armorer's wrench, then snug the included set screw with the provided hex key to lock it. Users regularly report a quick, painless install.




Reviews
There are no reviews yet.