0
0

Strike Industries Aluminum Extended Mag Plate for SIG P320 +5 (9mm)

UPC: 793811766578

$49.99

14 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The P320 already ships with a solid capacity, but five extra rounds in the same mag is hard to argue with. Strike Industries built this aluminum extended magazine plate specifically for OEM SIG Sauer P320 9mm magazines, giving you a +5 capacity boost while keeping the profile tighter than most competing extensions on the market.

The body is machined from 6061-T6 aluminum and finished in black anodize, so this isn't a flimsy polymer add-on that rattles or flexes. The design is described as having the slimmest profile in its class, which means it clears holsters and mag pouches cleanly without the snagging or drag that bulkier extensions can cause. At right around 1.97 ounces, the added weight is minimal.

Compatibility covers the factory 21, 17, and 15-round P320 magazines. Worth knowing: the included extended spring is designed to be used with the 21-round magazine body for proper function with the full +5. When using 17 or 15-round mags, you'll run the OEM spring. Due to natural variation in stamped steel magazine dimensions, some mags may start closer to +4 until the spring breaks in. That's normal and something Strike Industries addresses directly in their documentation.

For USPSA competitors, the overall length with a 21-round mag and this extension comes out to 162.5mm, which qualifies for Open Division. The extension is also sized to fit the 140mm race division limit. This thing was clearly designed with competition in mind, though it works just as well for range use or anyone who just wants more rounds per magazine.

The package includes everything needed for installation: the aluminum plate itself, an extended spring for the 21-round magazine body, two M4x3mm set screws, and a 2mm hex tool. Installation is straightforward, just don't overtighten the set screws past flush or you risk damaging the product. Strike Industries recommends keeping torque at or below 7 in/lbs.

Key Specifications

  • Manufacturer: Strike Industries
  • MPN: SI-EMP-AL-P320-BK
  • UPC: 793811766578
  • Caliber: 9mm
  • Capacity Increase: +5 rounds
  • Material: 6061-T6 Aluminum
  • Finish: Black Anodize
  • Weight: 1.97 oz
  • Compatible Magazines: OEM SIG Sauer P320 15, 17, and 21-round magazines
  • USPSA Open Division Length (21rd mag): 162.5mm
  • USPSA Fit: Fits 140mm race division limit
  • Set Screw Torque Limit: 7 in/lbs (0.79 Nm)
  • Incompatible Magazines: 10-round magazines; aftermarket brands (ACT, ProMag, ETS)
  • Color: Black

What’s Included

  • 1x Aluminum Extended Magazine Plate for SIG Sauer P320 (9mm)
  • 1x Extended length spring (for 21-round magazine body)
  • 2x Set screw M4x3mm
  • 1x 2mm hex tool
  • 1x Warning card

Frequently Asked Questions

Which P320 magazines does this Strike Industries EMP work with?

It's compatible with OEM SIG Sauer P320 magazines in 15, 17, and 21-round configurations. It does not work with 10-round magazines, and aftermarket brands like ACT, ProMag, and ETS are also not supported. If you're running a 15-round mag with a compact grip module, some fitting may be required.

Do I need different springs for different magazine sizes?

Yes, and it matters. The included extended spring is designed specifically for use with the 21-round OEM magazine body to get the full +5. For 17 and 15-round magazines, you'll use the factory OEM spring that came with your magazine. Strike Industries calls this out clearly in their documentation, so make sure you're pairing the right spring to the right mag.

Will my P320 magazines always load a full +5 rounds right away?

Not always, at least not immediately. Because stamped steel magazine bodies can vary slightly in internal dimensions, some mags may initially only reach +4 capacity. Strike Industries acknowledges this and recommends giving the spring time to break in, at which point most magazines will reach the full +5.

Is this extension legal for USPSA competition?

Yes. When installed on a 21-round P320 magazine, the overall length comes in at 162.5mm, which qualifies for Open Division. The extension is also dimensioned to fit within the 140mm race division limit. If you're competing, it's still worth confirming the rules with your specific match director.

How hard is the installation, and is there anything I should watch out for?

Installation is pretty simple and everything you need comes in the box, including a 2mm hex tool and two set screws. The main thing to be careful about is torque. Strike Industries specifies a maximum of 7 in/lbs on the set screws. The locking mechanism can look loose when the screw is flush, but that's correct. Tightening past that point risks damaging the extension.

Will this plate work with a magwell installed on my P320?

It depends on the magwell. The EMP works with most standard P320 grip modules, but some aftermarket magwells can cause fitment issues. The Agency Arms SIG P320 X-Series Magwell and Wilson Combat compact modules are known to require filing and fitting, and AXG grip modules with an integrated magwell are generally not compatible. When in doubt, check with the magwell manufacturer before buying.

Additional information

UPC

793811766578

Manufacturer

Manufacturer Part Number

EMPALP320BK

Caliber/Gauge

9mm

Color

Black

Model

Product Type

Magazine Extension

Style

Extension

Reviews

There are no reviews yet.

Be the first to review “Strike Industries Aluminum Extended Mag Plate for SIG P320 +5 (9mm)”