$24.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Sprinco built its reputation on springs that just keep running, and this kit brings two of their proven pieces together in one package. You get a Standard Power carbine buffer spring paired with the heavy-duty 5-coil bolt extractor spring, so you're covering both ends of the cycle. The buffer spring is color coded white and matches the load of a brand new mil-spec M4 carbine spring, which means it drops right into a standard carbine buffer tube and behaves the way your rifle was designed to. The difference is it holds that performance for the long haul instead of fading like the factory spring you're probably replacing.
Think of the white buffer spring as a permanent new mil-spec spring. It's the pick for folks who want reliable, familiar cycling in a properly configured 5.56 carbine without babysitting spring wear or chasing exotic tuning setups. Sprinco makes it from ASTM Grade A877 certified valve quality chrome silicon wire, the same material used in racing valve springs that see millions of compression cycles. It's heat treated, stress relieved, and dual-stage shot peened after winding, so it resists heat degradation and delivers consistent pressure through the whole cycle.
The heavy-duty 5-coil extractor spring lives inside your bolt and grips the case rim harder than a worn OEM spring ever could. That extra tension helps pull sticky brass and steel case, and it plays nicely with suppressed and shorter-barreled builds where reliable extraction matters most. Sprinco has documented well over 200,000 rounds on a single extractor spring, so this is genuinely plug and play and may be the last extractor spring your bolt ever needs.
Run the 5-coil spring with either the black extractor insert or a Viton O-ring, but not both, since the heavier load already negates the need for a D-Fender ring. It's an easy upgrade that quietly makes your AR more dependable round after round.
No, that's the whole point of the white Standard Power spring. It matches the load of a brand new mil-spec M4 carbine spring, so your rifle cycles exactly the way it was designed to. The upgrade is durability, since the chrome silicon construction holds that performance far longer than a factory spring.
Use one or the other, never both. Run the 5-coil spring with either the black extractor spring insert or a Viton O-ring. The heavier 5-coil load already provides plenty of case rim tension, so a D-Fender ring isn't recommended with it.
The HD 5-coil is a great match for 16-inch and shorter 5.56 carbines, suppressed setups, and rifles that run dirty. The added extractor pressure helps pull tough brass and steel case reliably. On very long barrels it can be a bit aggressive on case rims, so shorter guns benefit the most.
A long time. Sprinco uses certified valve quality chrome silicon, the same wire found in racing engine valve springs rated for millions of cycles. They've documented over 200,000 rounds on a single extractor spring, so for most owners this may be the last spring the bolt ever needs.
| UPC | 657780250097 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 25009 |
You must be logged in to post a review.
Reviews
There are no reviews yet.