Description
There is a good reason the 14-inch AR keeps winning people over. It splits the difference between a full-size carbine and a stubby pistol build, and the Saint Victor V2 nails the formula. Springfield starts with a 14-inch 4150 chrome moly vanadium barrel in a 1:8 twist with a Melonite finish, then permanently attaches a 4-prong flash hider to bring the whole assembly out to 16 inches. The result is a rifle that swings faster in tight spaces and rides easier in a truck or safe, without giving up the velocity and sight radius advantages that make a rifle a rifle. This particular model ships with a single 10-round Magpul PMAG.
What the Victor V2 Gets Right
The V2 refresh addressed the stuff people used to swap out first. The mil-spec charging handle is gone, replaced by a Radian Raptor ambidextrous unit that is genuinely one of the best in the business. The safety is a 45-degree ambidextrous lever with a short, quick throw, and the flat-faced nickel boron trigger breaks clean enough that you will not be shopping for a replacement anytime soon. B5 Systems handles the furniture with an Enhanced SOPMOD stock and Type 23 P-Grip, both a big step up from standard fare. Underneath it all sit forged 7075-T6 receivers with Springfield's Accu-Tite tension system keeping the fit snug, plus an enhanced M16 bolt carrier group with a 9310 steel bolt that is HPT and MPI tested.
Built to Run, Ready to Accessorize
The free-float aluminum handguard carries a full-length Picatinny top rail, plenty of M-LOK slots for lights and grips, and integrated QD sockets so sling setup takes minutes, not a parts order. Low-profile spring-loaded flip-up sights come installed, so you can zero and shoot the day you bring it home, then add a red dot or LPVO whenever you are ready. At roughly six and three quarter pounds with a mid-length gas system and a heavy tungsten buffer smoothing out the cycle, this is a soft-shooting, well-sorted carbine that needs nothing out of the box.
Key Specifications
- UPC: 706397975999
- Manufacturer Part Number: STV914556BLC-V2-B5
- Caliber: 5.56x45mm NATO (.223 Rem)
- Action: Semi-Auto, Direct Impingement, Mid-Length Gas
- Barrel: 14in 4150 CMV, Melonite Finish, 1:8 Twist
- Muzzle Device: 4-Prong Flash Hider, Pinned & Welded
- Receivers: Forged 7075-T6 Aluminum, Type III Hardcoat Anodized
- Bolt Carrier Group: Enhanced M16, 9310 Steel Bolt, HPT/MPI Tested
- Trigger: Flat-Faced, Nickel Boron Coated
- Handguard: Free-Float Aluminum, M-LOK, Full-Length Top Rail
- Stock: B5 Systems Enhanced SOPMOD
- Grip: B5 Systems Type 23 P-Grip
- Charging Handle: Radian Raptor Ambidextrous
- Safety: 45-Degree Ambidextrous
- Sights: Low-Profile Spring-Loaded Flip-Up, Adjustable
- Capacity: 10+1, One 10rd Magpul PMAG Included
What’s Included
- Springfield Saint Victor V2 5.56 rifle
- One 10-round Magpul PMAG
- Low-profile flip-up front and rear sights (installed)
- Padded rifle case
- Owner's manual
Frequently Asked Questions
Why does the Saint Victor V2 have a 14-inch barrel with a pinned flash hider?
The 4-prong flash hider is permanently pinned and welded to the 14-inch barrel, bringing the total barrel assembly to 16 inches. This gives you a shorter, faster-handling carbine while keeping the standard rifle configuration with a full buttstock. The trade-off is that swapping muzzle devices is more involved than on a threaded barrel, so it is best suited for folks happy with the factory setup.
What upgrades does the Saint Victor V2 have over the original Saint Victor?
The biggest change is the Radian Raptor ambidextrous charging handle replacing the old mil-spec unit, which was one of the first parts people upgraded on the original. The V2 also gets a continuous-taper 4150 CMV barrel for better heat management, lower-profile flip-up sights that play nicer with optics, B5 Systems furniture, and cleaner minimalist receiver markings.
Can I mount a red dot or scope on this rifle?
Absolutely. The full-length Picatinny top rail runs uninterrupted from the receiver across the free-float handguard, so red dots, LPVOs, and magnifier combos all mount easily. The included flip-up sights are low profile, so they can stay on the rifle as backups underneath most optics.
Does the Saint Victor V2 14in accept standard AR-15 magazines?
Yes. This model ships with one 10-round Magpul PMAG, but the magwell accepts any standard AR-15 pattern magazine. The flared magwell also makes reloads a little quicker and more forgiving.





Reviews
There are no reviews yet.