0
0

Speer 4402 TMJ .40 Cal .400 180 gr Flat Nose Bullets 100/Box

UPC: 076683044020

$23.99

17 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Speer 4402 is a 180 grain Total Metal Jacket flat nose bullet sized at .400 inches, making it a go-to projectile for anyone loading .40 S&W or 10mm for the range. The big difference between a TMJ and a standard FMJ comes down to the base. Where a conventional full metal jacket leaves lead exposed at the heel or tacks on a separate base cap, Speer wraps the entire lead core in a seamless copper jacket. That complete encapsulation cuts down on airborne lead and keeps your bore cleaner round after round.

What Makes the Speer 4402 TMJ Different

Speer builds these with Uni-Cor technology, which bonds the jacket to the core, and each bullet gets double swaged. That extra step is what gives you consistent bullet diameters and a uniform heel, two things that translate directly into tighter groups on paper. With a sectional density of .161 and a flat nose profile, this is a projectile that feeds well through most .40 and 10mm platforms and punches clean, easy-to-score holes in targets.

Loading the 180 Grain TMJ Flat Nose

At 180 grains, this is a classic weight for the .40 S&W and a solid mid-range choice for 10mm practice loads. Speer publishes load data for this exact bullet, and a common starting point for .40 S&W runs around a 1.120 inch overall length with mid-range pistol powders. As always, start low and work up using current published data for your specific powder and firearm. The flat nose and encapsulated base make these forgiving to seat and crimp with a light taper crimp.

These are made in the USA and shine for high-volume target shooting, plinking, and practice sessions where you want factory-FMJ performance without the cost. If you run a .40 or 10mm and load your own, the 4402 is the kind of workhorse bullet that keeps the range trips affordable and the groups honest. Each box holds 100 bullets. Note that this is a component bullet for reloading, not loaded ammunition.

Key Specifications

  • Manufacturer: Speer
  • Manufacturer Part Number: 4402
  • UPC: 076683044020
  • Bullet Caliber: .40 Caliber / 10mm
  • Bullet Diameter: .400 inch
  • Bullet Weight: 180 Grain
  • Bullet Type: Total Metal Jacket Flat Nose (TMJ-FN)
  • Core Material: Lead
  • Jacket Material: Copper
  • Construction: Uni-Cor, double swaged
  • Cannelure: No
  • Sectional Density: .161
  • Ballistic Coefficient: .135
  • Quantity: 100 Per Box
  • Recommended Usage: Target Shooting, Plinking
  • Made in USA: Yes

What’s Included

  • 100 Speer 4402 TMJ .40 Caliber .400 180 grain flat nose bullets

Frequently Asked Questions

What is the difference between the Speer 4402 TMJ and a standard FMJ bullet?

A standard full metal jacket typically leaves lead exposed at the base or uses a separate cap to cover it. Speer's TMJ uses Uni-Cor technology to completely wrap the lead core in a seamless copper jacket, including the base. The result is less airborne lead, less fouling, and more consistent accuracy than a conventional FMJ.

What calibers can I load with these 180 grain .400 bullets?

These are sized at .400 inches, which makes them a fit for both .40 S&W and 10mm Auto reloads. The 180 grain weight is one of the most popular options for .40 S&W and works well for mid-range 10mm practice loads. Always confirm your load data matches your cartridge, powder, and firearm.

Is the Speer 4402 loaded ammunition or a component bullet?

This is a component bullet for reloading only, not loaded ammunition. You will need your own brass, primers, and powder to assemble finished cartridges. Each box contains 100 of the 180 grain TMJ flat nose projectiles.

What load data should I use for the Speer 4402 TMJ in .40 S&W?

Speer publishes data for this exact bullet, and a common .40 S&W reference seats it around a 1.120 inch overall length with mid-range pistol powders. Treat published maximum charges as a ceiling, start low, and work up while watching for pressure signs in your gun. A light taper crimp works well with the encapsulated base and flat nose profile.

Additional information

UPC

076683044020

Manufacturer

Manufacturer Part Number

4402

Bullet Caliber

.40 Caliber

Quantity

100 Per Box

Shipping Weight

2.7

Reviews

There are no reviews yet.

Be the first to review “Speer 4402 TMJ .40 Cal .400 180 gr Flat Nose Bullets 100/Box”