0
0

Forward Controls OPF-G RMRcc Optic Mount Plate for Glock MOS

UPC: 687408648623

$76.00

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a full-size or compact Glock MOS and want to mount a Trijicon RMRcc, the factory adapter plates leave a lot to be desired. Forward Controls Design built the OPF-G, RMRcc to solve that. It's the RMRcc-specific member of their proven OPF line, machined from steel and built to keep the optic immobile on the slide. Instead of relying on screws alone to fight recoil, the plate cradles the sight between front and rear fences, which is the simplest way to stop sight-to-plate screws from loosening or shearing over time.

The RMRcc uses its own footprint, so this plate ditches the front lug holes found on the RMR version in favor of two larger threaded bosses that the sight-to-plate screws thread into. Those screws are beefed up too, which means less chance of stripping during install. One of the nicer things about the RMRcc compared to a full-size RMR is its narrower, shorter footprint, so the optic no longer overhangs the slide the way a standard RMR does. If you conceal carry a full-size Glock with a dot, the slimmer profile is a genuinely welcome change.

What the OPF-G, RMRcc Fits

This plate is designed for standard Glock MOS slides, specifically the G17, G19, G20, G22, G23, G26, G34, G40, G45, and G47. It is not compatible with the slim-line Glock 43X and 48, which use a different plate (the OPF-G43x/48). Keep in mind this is a mounting plate for a genuine Glock MOS cut, not an adapter that converts an RMR footprint over to an RMRcc footprint.

Dialing In the OPF-G RMRcc

Installation is straightforward with the included hardware, but a torque wrench is required to do it right. Forward Controls calls for 13 in-lb on the plate-to-slide screws and 18 in-lb on the sight-to-plate screws. The kit comes with everything to get the job done, including a packet of VC-3 thread locker to keep things honest after torquing. Pair it with your RMRcc and you've got a mounting setup that's going to hold zero and hold up.

Key Specifications

  • Manufacturer: Forward Controls Design
  • Manufacturer Part Number: OPF-G, RMRcc
  • UPC: 687408648623
  • Optic Footprint: Trijicon RMRcc
  • Mounting System: Glock MOS (Set 01 compatible)
  • Compatible Models: G17, G19, G20, G22, G23, G26, G34, G40, G45, G47
  • Material: Steel
  • Color / Finish: Black
  • Plate-to-Slide Torque: 13 in-lb
  • Sight-to-Plate Torque: 18 in-lb
  • Plate-to-Slide Screws: M3-0.5mm x 6mm
  • Sight-to-Plate Screws: T10 5-40 x 1/4
  • Country of Origin: USA

What’s Included

  • OPF-G, RMRcc optic mounting plate
  • T10 wrench
  • 2 plate-to-slide screws (M3-0.5mm x 6mm)
  • 2 sight-to-plate screws (T10 5-40 x 1/4)
  • VC-3 thread locker packet

Frequently Asked Questions

Which Glock models does the OPF-G, RMRcc plate fit?

It's built for standard Glock MOS slides including the G17, G19, G20, G22, G23, G26, G34, G40, G45, and G47. It will not work on the slim-line Glock 43X and 48, which need the dedicated OPF-G43x/48 plate instead. Make sure your slide is a factory MOS cut before ordering.

Is this a plate for a Glock MOS slide or an adapter for an existing RMR footprint?

This is a mounting plate that sits in a genuine Glock MOS cut. It is not an adapter that converts an RMR footprint over to an RMRcc footprint. Your slide needs to be a factory MOS slide for this to work.

Do I need a torque wrench to install the OPF-G, RMRcc?

Yes, a torque wrench is the way to go for a proper install. Forward Controls specs 13 in-lb for the plate-to-slide screws and 18 in-lb for the sight-to-plate screws. Getting these values right is what keeps the optic locked in and holding zero.

Why does the RMRcc sit better than a full-size RMR on a Glock slide?

The RMRcc has a narrower and shorter footprint than a standard RMR, so it no longer overhangs the edges of the slide. That slimmer profile is a nice plus if you conceal carry a full-size Glock with a red dot. The plate itself still cradles the sight between front and rear fences to keep it immobile.

Additional information

UPC

687408648623

Manufacturer

Manufacturer Part Number

OPF-G, RMRCC

Color

Black

Model

Reviews

There are no reviews yet.

Be the first to review “Forward Controls OPF-G RMRcc Optic Mount Plate for Glock MOS”