Description
The Sierra MatchKing 7mm/.284 cal 168 grain HPBT is one of those components that earned its reputation the hard way: on the firing line, against the clock, and in front of record books. This .284 diameter bullet carries a sectional density of .298 and a G1 ballistic coefficient of .488, which is why it holds its own out past the 600 yard mark where wind and drop start sorting the good handloads from the rest. The hollow point boat tail profile uses a very small meplat to keep drag down and the BC up, so your trajectory stays predictable shot after shot.
Why the 7mm 168 gr MatchKing Keeps Showing Up on Match Day
Accuracy is the whole point of this bullet, and the build reflects that. The jackets are drawn thin to an exacting concentricity standard, and weight is held to within plus or minus 0.3 grain from bullet to bullet. That kind of uniformity is what lets you chase single-digit velocity spreads when you pair it with the right powder. Shooters have long reached for this one in 7mm Rem Mag, 7mm-08, 7 SAUM, and the wildcat 284 variants, often with slower powders like RL-19, H1000, or Retumbo depending on the case.
Loading the Sierra .284 MatchKing for the Range
These are component bullets, not loaded ammunition, so you'll be seating them in your own prepped brass. With a bullet length right around 1.360 inches and a long bearing surface, they tend to be forgiving to tune and have a loyal following in rifle silhouette competition, especially for knocking down rams. They've also been a favorite for fireforming and first firings in wildcat chambers where you want a dependable, affordable bullet that still shoots straight.
Worth noting: the MatchKing line is designed strictly for target work. Sierra does not recommend it for hunting, since the design prioritizes precision over any particular terminal behavior. Keep it on paper and steel and it'll reward you.
Key Specifications
- Manufacturer: Sierra
- Manufacturer Part Number: 1930C
- UPC: 092763519301
- Caliber: 7mm/.284
- Bullet Diameter: 0.284 in
- Bullet Weight: 168 grain
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Product Line: MatchKing
- Sectional Density: 0.298
- Ballistic Coefficient (G1): 0.488
- Ballistic Coefficient (G7): 0.247
- Jacket Material: Copper
- Core Material: Lead
- Cannelure: No
- Tipped: Non-Tipped
- Intended Use: Target/Match
What’s Included
- Sierra MatchKing 7mm/.284 cal 168 gr HPBT component bullets
Frequently Asked Questions
Are these Sierra MatchKing 168 gr bullets good for hunting?
No, these are built for target and match work. Sierra does not recommend MatchKing bullets for hunting because the design is focused entirely on accuracy with no consideration given to terminal expansion. Keep them on paper and steel and reach for a GameKing or similar hunting bullet when you head to the field.
What is the ballistic coefficient of the 7mm 168 gr MatchKing?
This bullet carries a G1 ballistic coefficient of .488 and a G7 of .247, with a sectional density of .298. Sierra lists the BC in velocity bands, with .488 at 2800 fps and above, so it holds its line well across typical match velocities. That combination is a big reason it performs so well between 600 and 1000 yards.
What cartridges can I load the Sierra .284 168 gr MatchKing in?
Any 7mm/.284 caliber rifle cartridge you handload will take this .284 diameter bullet, including 7mm Rem Mag, 7mm-08, 7 SAUM, 284 Winchester, and various 284 wildcats. Many loaders pair it with slower rifle powders to take advantage of the long bearing surface. Always consult current published load data for your specific cartridge.
Are these loaded cartridges or just the bullets?
These are component bullets only, not loaded ammunition. You'll need your own brass, primers, and powder to assemble finished rounds. They're intended for handloaders working up precision target loads.




Reviews
There are no reviews yet.