Description
The .338 Marlin Express is one of those cartridges where handloading really pays off, and Hornady's Custom Grade New Dimension Series I 2-die set is the tool for the job. It covers the two core steps of making straight-walled, accurate rifle ammo: full-length resizing your fired brass back to spec, and seating your bullets with repeatable depth. If you've got a lever gun chambered in .338 Marlin Express and you want to tune your own loads, this is where it starts.
The real standout here is the Zip Spindle on the full-length sizing die. It uses a series of light threads cut on the spindle and collet, which locks everything down so the decapping assembly doesn't slip when you set it. Anyone who has fought with a spinning spindle while trying to tighten a lock nut will appreciate that. Adjustments stay put, and you're not re-doing your setup every session.
What the Series I 338 Marlin Express Die Set Brings to the Bench
The seating die runs Hornady's floating bullet alignment sleeve and stem, which pre-aligns the bullet and case neck before the bullet ever enters the case. That's what keeps your runout low and your groups tight. It also has a built-in crimp, so you can secure the bullet in the case without buying a separate crimp die, which matters with tubular magazine lever actions where bullet setback is a real concern.
Built to Outlast the Rifle
These dies are machined to tight tolerances with a smooth internal finish that cuts down on case sticking and friction. Hornady backs them with their No-Risk Lifetime Warranty, and they're guaranteed never to break or wear out from normal use. One tip worth following: give the metal parts a shot of Hornady One Shot case lube before your first run to keep everything moving clean. Keep in mind the shellholder is sold separately, so grab the right one for your press if you don't already have it on hand.
Key Specifications
- Manufacturer: Hornady
- Caliber: .338 Marlin Express
- Bullet Diameter: .338 in
- Series: Custom Grade New Dimension Series I
- Set Type: 2-Die Full Length Set
- Dies Included: Full Length Sizing Die, Seating Die
- Die Thread: 7/8"-14
- Spindle Design: Zip Spindle
- Seating System: Floating bullet alignment sleeve and stem with built-in crimp
- Warranty: Hornady No-Risk Lifetime Warranty
- Manufacturer Part Number: 546359
- UPC: 090255563597
What’s Included
- Full Length Sizing Die
- Seating Die
- 2 Sure-Loc lock rings
- Plastic storage box
Frequently Asked Questions
What dies come in the Hornady 338 Marlin Express Series I set?
This is a 2-die full-length set that includes a Custom Grade New Dimension full-length sizing die and a seating die. The sizing die resizes your fired brass back to spec, and the seating die sets your bullet depth with a built-in crimp option. Two Sure-Loc lock rings and a plastic storage box are included as well.
Do I need a shellholder with this 338 Marlin Express die set?
Yes, the shellholder is sold separately and is not included in the box. The .338 Marlin Express uses a semi-rimmed case, so make sure you pick up the correct shellholder for that rim size and your press. Many reloaders already have the right one on hand from other cartridges.
What is the Zip Spindle on the sizing die?
The Zip Spindle uses a series of light threads cut on the spindle and collet that lock it in place so it won't slip when you tighten the lock nut. It takes the fight out of setting your decapping assembly and keeps your adjustments repeatable. It's one of the features that makes Hornady's sizing die easy to live with.
Can this seating die crimp the bullet too?
Yes, the seating die has a built-in crimper, so you can seat and crimp without buying a separate crimp die. That's handy for the .338 Marlin Express since it's typically run in tubular magazine lever actions where a solid crimp helps prevent bullet setback under recoil.



Reviews
There are no reviews yet.