$36.00
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If your Savage Model 25 came with flimsy factory bases or nothing at all, this EGW one-piece rail is the kind of upgrade that pays off every time you mount an optic. It replaces the two-piece setup with a single solid bar of aluminum that bridges the receiver, giving you a stiffer, more consistent platform to build on. EGW machines these in their own shop, and the whole package down to the screws and the wrench is made in the USA.
This base is cut specifically for the Savage 25, so the hole spacing lines up with the factory mounting holes on the receiver. No drilling or tapping required. It runs 0 MOA, which is what you want for standard rimfire and varmint-range work where you're not trying to stretch out to extreme distances. The Picatinny cross slots run the full length of the rail, so you've got freedom to slide your rings forward or back and get your eye relief dialed in right.
It's machined from domestic 6061 T6 extruded aluminum, then tumbled, sandblasted, and Type II anodized for a matte black finish that holds up to real use. There's a channel milled down the center that trims the weight to right around 2 ounces without giving up rigidity. In a lot of setups it leaves your factory iron sights usable too, which is a nice bonus if you like a backup. The rail accepts any standard Picatinny or Weaver rings, so you're not locked into one brand.
Installation is straightforward. EGW recommends torquing the screws to around 20 inch-pounds with a drop of blue Loctite to keep everything locked down under recoil. It's a quick job that gives you a rock-solid foundation whether you're running a scope for varmints or a red dot for plinking.
No. It's cut to line up with the factory scope mount holes on the Savage 25 receiver, so it bolts right on with the included hardware. EGW does recommend measuring your receiver hole spacing against the published dimensions to confirm the fit before you mount it.
This mount is available in 0 MOA only. That's the standard choice for rimfire and typical varmint distances where you don't need built-in elevation to reach way out there. If you need added cant for long-range shooting, you'd want to look at a 20 MOA base instead.
It's a true Picatinny-style base, so it accepts any standard Picatinny or Weaver scope rings. That gives you plenty of flexibility in ring height and brand. The full-length cross slots also let you position your rings to fine-tune eye relief.
EGW recommends torquing the mounting screws to about 20 inch-pounds and adding a small drop of blue Loctite so nothing walks loose under recoil. The screws and a T-10 bit are included in the box. It's a quick, straightforward job that leaves you with a solid, rigid platform.
| UPC | 841370105779 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 41920 |
| Color | Black |
| Length | 8.9000 |
| Model | |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.