0
0

EGW Savage Flat Back Short Action 0 MOA Picatinny Rail Scope Mount

UPC: 841370105564

$34.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Got an older Savage sitting in the safe that still has a flat rear on the receiver? This EGW rail is the fix for bringing that classic bolt gun into the modern optics era. It's a one-piece Picatinny base designed specifically for the Flat Back short action rifles Savage built before the early 2000s, back when they used a receiver with a round front and a flat back end rather than the round-back AccuTrigger guns that came later.

What the Flat Back Short Action 0 MOA Rail Fits

This one is cut for the short action Flat Back Savages, which covers models like the 110, 111, 112, 114, and 116 with the flat rear receiver, plus the Savage Striker pistol and Stevens 200. The key number to check is the center spread between your two middle receiver holes, which needs to measure 3.93 inches. Savage made these Flat Back actions in short, medium, and long lengths, and your caliber alone won't tell you which one you've got, so it's worth pulling a caliper out and measuring before you order. If your rifle has a round rear receiver, you'll want the round back version instead.

Build and Fit of the EGW Savage Rail

EGW machines these in-house from domestic 6061 T6 extruded aluminum, then tumbles, sand blasts, and anodizes them in a matte black Type II finish for the long haul. At the 0 MOA spec, it sits flat with no built-in cant, which is the right call for general hunting and target work inside roughly 500 yards. A channel milled down the center keeps the weight down to around 2 ounces, and in a lot of cases it leaves your factory iron sights usable. Both sides carry a bevel, so it's ambidextrous and plays nice for left or right hand shooters.

Mounting Your Optic

Since it's a true Picatinny profile, it works with any Picatinny or Weaver style rings you want to run. The mounting screws and a T-10 bit come in the box. EGW recommends torquing the base screws to about 20 inch-pounds with a drop of blue thread locker to keep everything locked in tight.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 41200
  • UPC: 841370105564
  • Model: Savage Flat Back Short Action
  • Style: One Piece Picatinny Rail
  • MOA: 0 MOA
  • Material: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Type II Anodizing
  • Color: Black
  • Center Spread: 3.930 in
  • Overall Length: 6.670 in
  • Height: 0.4 in (top of receiver to top of rail)
  • Weight: Approx. 2 oz
  • Ambidextrous: Yes (beveled both sides)
  • Mounting Hardware: #6-48 x 1/4 screws and T-10 bit included
  • Country of Origin: Made in USA

What’s Included

  • EGW Savage Flat Back Short Action Picatinny rail (0 MOA)
  • #6-48 x 1/4 mounting screws
  • T-10 Torx bit

Frequently Asked Questions

How do I know if this Flat Back rail fits my Savage?

This rail is made for pre-2003 Savage short action rifles that have a flat rear receiver, not the round-back AccuTrigger guns. The surefire way to confirm fit is to measure the center-to-center distance between the two middle holes on your receiver, which needs to be 3.93 inches. Savage built Flat Back actions in short, medium, and long lengths, so measuring beats guessing by caliber.

What's the difference between 0 MOA and 20 MOA on this mount?

The 0 MOA version sits flat with no built-in forward cant, which works great for general hunting and shooting inside about 500 yards. A 20 MOA base adds downward elevation bias to help you reach way out past 500 yards. For most folks running a classic Savage at normal distances, the 0 MOA is the one you want.

What rings will work with this EGW Savage rail?

It's a true Picatinny profile base, so any Picatinny or Weaver style rings will clamp right on. That gives you a ton of options for matching ring height to your scope's objective diameter. The rail itself does not come with rings, so you'll pick those up separately.

Does this rail come with mounting hardware?

Yes, it ships with the #6-48 mounting screws and a T-10 bit to get it installed. EGW suggests torquing the screws to around 20 inch-pounds and adding a drop of blue thread locker so nothing walks loose under recoil. Rings and the optic are purchased separately.

Additional information

UPC

841370105564

Manufacturer

Manufacturer Part Number

41200

Color

Black

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Savage Flat Back Short Action 0 MOA Picatinny Rail Scope Mount”