Description
The EGW 46120 is a one-piece Picatinny rail built specifically for the Ruger M-77 Long Action and Hawkeye Long Action. Ruger's factory setup uses proprietary integral bases, which boxes you into a limited selection of rings. This rail replaces that whole arrangement with a universal 1913 Picatinny standard, so you can finally run the rings and optic you actually want. It's machined from domestic 6061-T6 extruded aluminum and wears a matte black anodized finish that blends right in with most rifle setups.
What Makes the 46120 Rail Different
This is a drill-and-tap mount, not a clamp-on. The rail is drilled for 8-40 screws, and your receiver needs to be drilled and tapped to accept it. That takes it from a quick DIY job to real gunsmithing work, but the payoff is a rock-solid, permanent mounting surface that won't shift under recoil. The cross slots run the full length of the rail, giving you plenty of room to position rings fore and aft for proper eye relief. A machined channel down the center trims weight and, in many cases, keeps your factory iron sights usable underneath.
Dialing In the Right Zero
The 46120 is the flat 0 MOA version, meaning there's no built-in cant. That makes it the sensible pick for general hunting and target work inside roughly 500 yards, where you don't need extra elevation baked into the base. If you're reaching way out past that, EGW's 20 MOA version is the one to look at instead.
Fitment You Need to Confirm
This rail is cut for the newer "flat top" profile receivers found on modern M-77, Mark II, and Hawkeye Long Action rifles. It will not seat correctly on the older rounded tang-safety M-77 actions, and it's not meant for factory drilled-and-tapped Hawkeyes like the Hunter, Long Range Hunter, or Long Range Target. Check your receiver profile before ordering so you get the right part the first time. Proudly made in the USA.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 46120
- UPC: 841370106486
- Model: M-77
- Fits: Ruger M-77 Long Action, Ruger Hawkeye Long Action (flat top receiver)
- MOA: 0 MOA (Parallel)
- Rail Type: One Piece Picatinny
- Material: Domestic 6061-T6 Extruded Aluminum
- Finish: Matte Black Anodized
- Color: Black
- Overall Length: 6.670 in
- Center Spread: 4.215 in
- Height: 0.4 in (top of receiver to top of rail)
- Weight: 2 oz
- Receiver Prep: Requires drilling & tapping (8-40)
- Origin: Made in USA
What’s Included
- EGW Ruger M-77 Long Action 0 MOA Picatinny rail
- 8-40 mounting screws
- T-10 bit / hex wrench
Frequently Asked Questions
Does the EGW 46120 rail clamp on, or do I have to drill and tap my Ruger M-77?
This is a drill-and-tap mount, so it does not clamp onto the factory integral bases. The rail comes drilled for 8-40 screws, and your receiver will need to be drilled and tapped to accept it. Because that's real gunsmithing work, most folks have a qualified gunsmith handle the install unless they're set up to do it themselves.
Will this rail fit my older tang-safety Ruger M-77?
No. The 46120 is designed for the newer "flat top" profile receivers on modern M-77, Mark II, and Hawkeye Long Action rifles. The older rounded tang-safety receivers have a different contour and the rail won't seat correctly on them.
Should I get the 0 MOA or the 20 MOA version?
The 0 MOA 46120 has no built-in cant and is the go-to for general hunting and shooting inside roughly 500 yards. If you plan to stretch things out well past that, EGW's 20 MOA option gives your scope extra elevation to work with at long range.
What rings work with the EGW M-77 Picatinny rail?
Since this is a true 1913 Picatinny platform, you can run any standard Picatinny or Weaver style rings on it. The cross slots run the full length of the rail, so you've got flexibility to set your rings at the right spacing for proper eye relief. QD rings will work as long as they use cross bolts.




Reviews
There are no reviews yet.