$144.00
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Volquartsen Accurizing Kit is the classic upgrade for anyone who loves their Ruger rimfire but keeps fighting the heavy, creepy factory trigger. This drop-in kit swaps out the internals that matter most and delivers a clean, light 2.25 lb pull. Real-world results back it up too, with plenty of owners reporting factory pulls in the 4 to 5 lb range dropping down to right around that 2.25 lb mark once the kit is in. No stoning, filing, or gunsmith fitting required, though final pull can vary a touch due to normal factory frame differences.
This particular version (VC2AK-S) pairs a black target trigger with a silver extended bolt release. The trigger itself features adjustable pretravel and overtravel screws, and Volquartsen even includes medium strength Loctite to lock your settings in once you dial them where you want them. The parts are the real deal, with the hammer and sear wire EDM-cut from hardened tool steel, so this is a genuine performance bump and not just a spring swap.
Beyond the lighter pull, this kit knocks out most of the pre-travel and creep that makes the stock trigger feel spongy. You get a shorter, cleaner break that translates directly into tighter groups, whether you're punching paper, ringing steel, or plinking cans on a lazy afternoon. It fits the Ruger MKII, MKIII, and all variations of the MKIII 22/45, though the extended bolt release and sear spring aren't used on the 22/45 frames.
Installation is a DIY job for anyone comfortable taking down their Ruger. Volquartsen has a step-by-step video and printed instructions, and folks with basic tools and a little patience get great results. First-timers sometimes take a few hours, so take your time and follow the video. One important note for MKIII owners: this kit includes the Volquartsen MKII hammer bushing and target hammer, which lets you remove the MKIII magazine disconnect. Only use the bushing supplied in this kit and no other aftermarket bushing.
This kit fits the Ruger MKII, MKIII, and all variations of the MKIII 22/45. Keep in mind the extended bolt release and sear spring aren't used when installing in a 22/45 frame. It is not designed for the MK IV, which uses a different kit.
Volquartsen rates it at a crisp, clean 2.25 lb pull, and that matches what most owners report after installing it. Many go from a factory pull in the 4 to 5 lb range down to right around 2.25 lb. Final pull can vary slightly due to normal factory frame differences from gun to gun.
No stoning or fitting is required, so it's a true drop-in for anyone comfortable disassembling their Ruger. Volquartsen offers a step-by-step install video and printed instructions that walk you through it. First-timers may want to set aside a couple hours and take it slow, since there are several small parts to keep track of.
Yes. This kit includes the Volquartsen MKII hammer bushing and target hammer, which allows you to remove the MKIII magazine disconnect. Only use the bushing that comes in this kit and never substitute another aftermarket bushing, as that can cause malfunctions.
| UPC | 810162011352 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | VC2AK-S |
| Model | |
| Style | Drop-In |
You must be logged in to post a review.
Reviews
There are no reviews yet.