Description
The Ruger 10/22 has been a favorite plinker and small-game rifle for generations, but the factory setup can leave you short on elevation once you start reaching past the 150-yard mark. That's where the EGW 20 MOA Picatinny rail earns its keep. This one-piece base adds a built-in 20 MOA of cant, which tilts your optic forward just enough to give you back the internal elevation travel you'd otherwise burn through trying to dial for distance. For rimfire precision work like NRL22 or just stretching your 10/22 out to its limits, it's a simple swap that makes a real difference.
What Sets the EGW 10/22 Rail Apart
EGW machines this mount from domestic 6061-T6 extruded aluminum and finishes it with a matte black Type II anodizing, so it holds up to handling and weather without adding bulk. It weighs in right around 2 ounces and sits roughly 0.4 inches tall measured from the top of the receiver to the top of the rail. The full-length Picatinny cross slots run the length of the base, giving you plenty of room to position your rings for proper eye relief, and it plays nice with both Picatinny and Weaver-style rings. It's an ambidextrous design, and in many cases it won't block your factory iron sights.
Getting the EGW 20 MOA Mount Dialed In
Installation is about as straightforward as it gets. The rail ships with #6-48 x 1/4 inch screws and a T-10 bit, centering on a 2.57-inch spread. EGW recommends torquing the screws to 20 in/lbs with a drop of blue Loctite to keep everything locked in and holding zero shot after shot. Folks who've run this rail consistently mention it mounts up solid, comes with all the hardware you need, and fixed their elevation shortfall when a standard flat base left them running out of turret.
One thing worth knowing up front: this mount is made specifically for the standard Ruger 10/22 and will not fit the 10/22 Takedown model. If you've got the standard rifle, this is a clean, dependable upgrade that gives your optic the foundation it deserves.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 46102
- UPC: 841370106455
- Model Fit: Ruger 10/22 (standard, not Takedown)
- Cant: 20 MOA
- Rail Type: One-Piece Picatinny (MIL-STD 1913)
- Ring Compatibility: Picatinny and Weaver rings
- Material: Domestic 6061-T6 Extruded Aluminum
- Finish: Matte Black Type II Anodized
- Overall Length: 6.276 in
- Height: 0.4 in (top of receiver to top of rail)
- Center Spread: 2.57 in
- Weight: 2 oz
- Ambidextrous: Yes
- Torque Spec: 20 in/lbs
- Country of Origin: USA
What’s Included
- EGW Ruger 10/22 20 MOA Picatinny rail scope mount
- #6-48 x 1/4 inch mounting screws
- T-10 bit
Frequently Asked Questions
Will this EGW rail fit my Ruger 10/22 Takedown?
No, this mount is made specifically for the standard Ruger 10/22 and will not fit the 10/22 Takedown model. If you're running the standard rifle, it's a direct fit using the included hardware. For a Takedown, you'll want to look at a mount designed for that platform.
What does the 20 MOA cant actually do for me?
The 20 MOA of built-in angle tilts your optic slightly forward, which hands back a chunk of your scope's internal elevation travel. That means you can dial for targets out past 150 yards without bottoming out your turret. It's the go-to choice for precision rimfire and NRL22 style shooting where you're stretching the 10/22 to distance.
Does this rail work with both Picatinny and Weaver rings?
Yes. The base is cut to MIL-STD 1913 Picatinny spec, so it accepts both Picatinny and Weaver-style scope rings. The full-length cross slots also give you flexibility to position your rings for the right eye relief.
How hard is it to install the EGW 20 MOA mount?
It's a quick job for most people. The rail comes with the #6-48 x 1/4 inch screws and a T-10 bit you need, and EGW recommends torquing them to 20 in/lbs with a drop of blue Loctite. That keeps everything locked down and holding zero under repeated shooting.




Reviews
There are no reviews yet.