0
0

RPM Precision 30mm Medium Scope Rings w/ Co-Linear Bubble Level

UPC: 850063702010

$174.99

20 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Rifle cant is one of those quiet accuracy killers that shows up when you least want it, especially as distance stretches out. These RPM Precision 30mm rings tackle that problem by putting a bubble level directly into the ring set, so you get a real-time reference without reaching for a separate level or balancing one on your turret. The rings hold a standard 30mm scope tube at a medium height of 1.00 inch from the base and bolt onto Picatinny rails.

What makes these different from a plain ring set is where the level lives. RPM put it in the lower half of the ring so it becomes co-linear with your rifle once everything is torqued down. From behind the scope, you can read the bubble with your non-dominant eye, which means a quick glance confirms you are level before you break the shot. No breaking cheek weld, no lifting your head off the stock.

Why the Co-Linear Level in These RPM Rings Matters

Building the level into the ring also cleans up your mounting process. Instead of juggling multiple small levels and hoping everything stays put, you level the rifle, level the scope, then torque the cap hardware. It is a straightforward sequence that takes a lot of the guesswork out of getting an optic sitting true, and it removes the balancing act that frustrates plenty of folks setting up a new build.

Build Quality on the RPM 30mm Medium Ring Set

The ring body and caps are machined from 6061-T6 aluminum, with a 303 stainless steel cross bolt and nut for a solid lockup on the rail. An alignment lug keeps the cap and base lined up correctly while you run the cap screws, and the set ships with a T25 Torx bit so you have what you need to get started. Recommended torque is 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt. Everything here is proudly made in the USA, and the set weighs in at a trim 4.4 ounces, making it a sensible choice for precision rifles, hunting rigs, and long-range setups alike.

Key Specifications

  • Tube Diameter: 30mm
  • Ring Height: Medium, 1.00 inch from base to tube center
  • Mount Type: Picatinny rail
  • Ring Body Material: 6061-T6 aluminum
  • Cross Bolt: 303 stainless steel, 1/2 inch
  • Finish: Black
  • Integrated Level: Co-linear bubble level, visible with non-dominant eye
  • Cap Screw Torque: 18 in-lbs
  • Cross Bolt Torque: 45 in-lbs
  • Weight: 4.4 oz
  • Country of Origin: USA
  • Manufacturer: Ruff's Precision Manufacturing (RPM)
  • Manufacturer Part Number: CLR-30100
  • UPC: 850063702010

What’s Included

  • 6061-T6 aluminum ring bodies and caps (set of 2)
  • 303 stainless steel cross bolt and nut (1/2 inch)
  • Alignment lug for cap/base positioning
  • T25 Torx bit

Frequently Asked Questions

What size scope will these RPM rings fit?

These rings are made for standard 30mm scope tubes. They hold the optic at a medium height of 1.00 inch measured from the base to the center of the tube, which works well for a wide range of rifles and objective sizes. If your scope has a 34mm tube, you will want a different model.

What does the co-linear bubble level actually do?

RPM built the level into the lower half of the ring so it sits co-linear with your rifle once mounted. That lets you glance at the bubble with your non-dominant eye from behind the scope to confirm you are level before the shot, without lifting your head off the stock. It also doubles as a reference during scope mounting so you can get the optic sitting true.

Do these rings mount to a Picatinny rail?

Yes, they are built to clamp onto Picatinny rails using the 303 stainless steel cross bolt. RPM recommends 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt for a secure fit.

Do I need any special tools to install them?

The set comes with a T25 Torx bit to run the cap screws, so you have the key tool in the box. A torque wrench is a smart addition to hit the recommended values and keep everything consistent. An alignment lug is also included to keep the cap and base lined up correctly during installation.

Additional information

UPC

850063702010

Manufacturer

Manufacturer Part Number

CLR-30100

Shipping Weight

0.461

Reviews

There are no reviews yet.

Be the first to review “RPM Precision 30mm Medium Scope Rings w/ Co-Linear Bubble Level”