0
0

Johnny Stewart RR1 Raptor Invector Plus 20 Gauge Choke Tube

UPC: 810174902082

$123.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Johnny Stewart RR1 Raptor is Rob Roberts Gun Works' close-range answer for 20 gauge Invector Plus barrels. Where the RR2 is tuned for mid-range ducks and dove and the RR3 reaches out for geese and open-water birds, the RR1 sits at the tight end of the lineup and is built to throw a dense, concentrated core when you're working birds up close or breaking clays inside 30 yards. The internal cuts are the heart of it, shaping a hotter center pattern when you feed it the right load.

What Sets the RR1 Raptor Apart

This choke is part of the newer Raptor series, which took the same thinking behind the Triple Threat chokes and pushed it further with updated machining. The result is a tube that runs to tolerances well past the usual industry standard, finished in E-Series Cerakote with machined claw marks along the extended section instead of traditional knurling, so it's easy to grip and easy to spot in a pocket full of gear.

Fit and Build on the RR1 Raptor

The body is 17-4 PH U.S. stainless steel, a precipitation-hardened alloy that holds up to steel, lead, and the heat of repeated shots without giving up its shape. This particular tube is threaded for the 20 gauge Invector Plus system, so it belongs in Browning and Winchester back-bored barrels marked Invector Plus, including guns like the Maxus, SX2, SX3, and SX4 along with 20 gauge Citori models. It won't interchange with Standard Invector or Invector DS, so it's worth a quick look at the stamp near your receiver before ordering.

One thing to keep in mind on over-under guns: the Raptor design is meant to run in a single barrel only, not both, so plan your setup around that. For close-in waterfowl, early-season dove, and target work where a tight core makes the difference, the RR1 gives you a real edge on that first shot.

Key Specifications

  • Manufacturer: Johnny Stewart / Rob Roberts Gun Works
  • Model: RR1 Raptor
  • Manufacturer Part Number: 200299
  • UPC: 810174902082
  • Gauge: 20 Gauge
  • Choke System: Invector Plus
  • Constriction Series: RR1 (Close Range)
  • Material: 17-4 PH U.S. Stainless Steel
  • Finish: E-Series Cerakote
  • Style: Extended with machined claw marks
  • Series: Raptor

What’s Included

  • Johnny Stewart RR1 Raptor Invector Plus 20 gauge choke tube

Frequently Asked Questions

What is the RR1 Raptor choke best used for?

The RR1 is the close-range tube in the Raptor lineup, built to throw a tight, dense core pattern. It shines on early-season dove, close-in waterfowl, and clay targets inside about 30 yards. If you tend to reach out farther, the RR2 for mid-range or RR3 for long range would be the better call.

Will this RR1 Raptor fit my 20 gauge shotgun?

This tube is threaded for the 20 gauge Invector Plus system, so it fits Browning and Winchester back-bored barrels stamped Invector Plus, including models like the Maxus, SX2, SX3, SX4, and 20 gauge Citori. It will not interchange with Standard Invector or Invector DS barrels. Check the stamp near your receiver before ordering to be sure.

What is the choke made from?

The RR1 Raptor is machined from 17-4 PH U.S. stainless steel, a precipitation-hardened alloy known for strength and durability. It holds up well to steel, lead, and repeated shots, and the extended section wears an E-Series Cerakote finish with machined claw marks for grip.

Can I run the RR1 Raptor in both barrels of an over-under?

No. The Raptor design is meant to be used in only one barrel of an over-under shotgun. The internal geometry does not allow for placement in both barrels, so set your gun up accordingly.

Additional information

UPC

810174902082

Manufacturer

Manufacturer Part Number

200299

Caliber/Gauge

20 Gauge

Reviews

There are no reviews yet.

Be the first to review “Johnny Stewart RR1 Raptor Invector Plus 20 Gauge Choke Tube”