Description
The Rob Roberts T3 Triple Threat is the long-range member of the Triple Threat family, and it earns its keep when the birds are high or the trap targets are hanging out at the far edge of your range. Where the T1 opens things up for close work and the T2 handles the mid-distance stuff, the T3 lands in improved-modified territory, tightening your pattern so more pellets stay on target when distance starts working against you. This one is cut for the Beretta/Benelli Mobil thread pattern in 20 gauge.
What sets Rob Roberts chokes apart isn't marketing, it's the machining. Every tube is turned from 17-4 PH stainless steel right here in the USA, and the constrictions are held to tolerances well past what you see from most factory chokes. The stainless build shrugs off moisture and grit, so wet marsh mornings and dusty trap ranges don't chew it up over time.
Where the T3 Triple Threat Shines
Think long trap, pass-shooting ducks, high doves, and any clay target that makes you feel like you're reaching. The idea behind the T3 isn't just cramming pellets into a knot. Roberts is a pattern guy, not a percentage guy, so the geometry is built to keep the core of the pattern even and useful downrange rather than blowing a hole through the middle. That translates to cleaner breaks and fewer frustrating edge-of-range misses.
Load Flexibility with the T3 Triple Threat
One of the best parts is how little it fusses over ammo. The T3 is rated safe for steel, lead, and exotic non-toxic shot, so you can run your waterfowl loads and swap right over to lead target loads without switching tubes. As with any new choke, pattern it with the loads you actually plan to shoot before you count on it in the field. Give the threads a quick wipe and a dab of choke lube now and then and this tube will ride in your gun for a long, long time.
Key Specifications
- Manufacturer: Johnny Stewart (Rob Roberts Gun Works)
- Manufacturer Part Number: 200114
- UPC: 810174900231
- Model: T3 Triple Threat
- Gauge: 20 Gauge
- Thread Pattern: Beretta/Benelli Mobil
- Material: 17-4 PH Stainless Steel
- Constriction Range: Long-range (roughly improved modified)
- Shot Compatibility: Steel, lead, and exotic non-toxic
- Country of Origin: Made in USA
- Category: Shotgun Chokes
What’s Included
- (1) Rob Roberts T3 Triple Threat 20 Gauge Mobil choke tube
Frequently Asked Questions
What kind of shooting is the T3 Triple Threat best for?
The T3 is the long-range choke in the Triple Threat lineup, sitting around improved-modified constriction. It's built for high flyers, pass-shooting waterfowl, long trap targets, and clays that stretch out to the far end of your range. If your typical shots are close and fast, the more open T1 or mid-range T2 will serve you better.
Will this choke fit my 20 gauge shotgun?
This particular T3 is machined for the Beretta/Benelli Mobil thread pattern in 20 gauge. Rob Roberts offers the Triple Threat in several other fitments too, so double-check that your gun uses the Mobil system before ordering. If you're unsure, the thread pattern often lines up with the shotgun's factory choke markings.
Can I shoot steel and other non-toxic loads through the T3?
Yes. The T3 is rated safe for steel, lead, and exotic non-toxic shot, which is a big reason it works so well as a do-it-all tube. That means you can run waterfowl loads and switch to lead target loads without changing chokes.
What makes Rob Roberts chokes different from a factory choke?
Every tube is turned from 17-4 PH stainless steel in the USA and machined to tolerances tighter than the industry standard. Rob Roberts focuses on even, usable pattern density rather than just packing pellets into a tight clump. The result is a more consistent, reliable pattern downrange.




Reviews
There are no reviews yet.