Description
This is the base that anchors the whole Marble Arms Improved Peep Tang Sight setup. It mounts to the tang of your rifle, right behind the hammer, and holds the removable upright post and aperture that do the actual aiming. The .782" height and 991015 part number make this a gun-specific base, so it lines up with a specific group of rifles including Winchester 1866, 1876, and 1886 (current production), the Browning 78 and 1886, along with several other lever guns and single shots on Marble's fitment chart.
What makes the Improved version worth the upgrade is the modular design. A setscrew releases the upright post, letting you drop in any of four incrementally taller uprights sold separately. That means one base can take you from short-range plinking around 30 yards all the way out to 500, and with the long-range post, some setups reach 1000 yards. The base itself is CNC machined so parts mate up cleanly and hold zero when you swap posts.
Why the .782 Base Matters for Your Build
Marble Arms sells this system in three pieces on purpose: the base, the screw set, and the upright. The base and screws are matched to your exact rifle, while the uprights are interchangeable. Before ordering, check Marble's fitment chart to confirm 991015 is the right base for your make and model, then grab the matching screw set and whichever upright suits your shooting distance.
Getting the Improved Tang Sight Base Dialed In
Once mounted, the sight gives you precise, repeatable windage and elevation. Each click moves point of impact roughly a quarter inch at 100 yards, with 66 windage clicks and 85 elevation clicks to work with. A peep sight like this speeds up target acquisition because your eye naturally centers through the aperture rather than fussing over the rear notch. Just fold it down or pull it off with the Allen wrench when you want to run your factory irons.
Key Specifications
- Manufacturer: Marble Arms
- Manufacturer Part Number: 991015
- UPC: 871373004458
- Color: Black
- Base Height: .782"
- Material Construction: CNC machined
- Sight Type: Improved Peep Tang Sight Base
- Windage Adjustment: 66 clicks (.260")
- Elevation Adjustment: 85 clicks (.335")
- Click Value: Approx. 1/4" at 100 yards
- Uprights Accepted: 4 interchangeable heights (sold separately)
- Country of Origin: USA
What’s Included
- Improved peep tang sight base (.782", black)
- Allen wrench
Frequently Asked Questions
Does the improved tang sight base come with the upright and screws?
No. This is the base only, and it ships with an Allen wrench for the setscrew. Marble Arms sells the system in separate pieces, so you'll need to add the correct gun-specific screw set and at least one upright post to complete a working sight.
Which rifles does the 991015 base fit?
The .782" 991015 base covers a range of rifles on Marble's fitment chart, including the Winchester 1866, 1876, and current-production 1886, plus the Browning 78 and 1886 among others. Since tang dimensions vary between makes and models, always confirm your exact rifle against Marble Arms' fitment list before ordering the matching screw set.
How far can I shoot with the Improved Tang Sight system?
It depends on which upright you pair with the base. The shortest upright handles close range work while taller uprights stretch things out, and with the long-range post some setups reach out to 1000 yards. Caliber, barrel length, and load all factor into the real-world distance.
Is this a permanent installation?
The base itself mounts to the tang and is meant to stay put, but the sight portion folds down or lifts off with the included Allen wrench when you want a clear sight line for your factory irons. Installation involves drilling and tapping the tang if your rifle isn't already set up for it.





Reviews
There are no reviews yet.