Description
The Redding Type S Match Bushing Neck Die Set is built for 6mm Dasher handloaders who treat consistency as the whole game. This three-die set pairs a Type S bushing-style neck sizing die with a body die and a Competition micrometer seating die, giving you precise, repeatable control over neck size, neck tension, and seating depth. If you're chasing tiny groups at distance, this is the kind of tooling that rewards the effort you put into prepping brass.
How the Type S Neck Sizing Die Works
The heart of this set is the bushing system. Instead of a fixed sizing diameter, the neck die accepts interchangeable bushings sold in .001" increments, so you can match your exact brass and chamber and get the neck tension you want. The bushing floats slightly and self-centers on the case neck, which helps keep runout low and concentricity high. The adjustable decapping rod lets you position the bushing to size only part of the neck length when you want to leave a little unsized brass for alignment. A standard size button comes with the decapping rod, so reloaders running commercial brass as-is have that option covered too.
Dialing In the 6mm Dasher
The Dasher is an accuracy-driven round born from the 6mm BR Norma, and neck tension is one of the biggest levers you have for tuning it. A common starting point is to measure the outside neck diameter of a loaded round and subtract .002" to .003" to account for brass springback, then pick up a bushing on either side to test. Brass brand and neck wall thickness vary, so most folks keep a few bushings on hand to fine-tune. Note that bushings are sold separately, which is standard for the Type S line.
What Rounds Out the Set
The body die handles full-length body sizing and shoulder bump without touching neck tension, which is handy for brass that's gotten tight to chamber after several firings. The Competition seating die uses a micrometer adjustment and a sliding sleeve that supports the case and bullet in alignment before seating, so your seating depth stays consistent shot to shot. Everything is machined from heat-treated steel and arrives in a Redding storage case. A shell holder is not included.
Key Specifications
- Manufacturer: Redding
- Caliber: 6mm Dasher
- Die Type: Type S Match Bushing Neck
- Set Configuration: 3-Die Set
- Sizing Style: Bushing-style neck sizing (bushings sold separately)
- Bushing Increments: .001"
- Seating Die: Competition micrometer seating die
- Material: Heat-treated steel
- Manufacturer Part Number: 38648
- UPC: 611760386480
- Shipping Weight: 1.62 lbs
- Country of Origin: United States
What’s Included
- Type S Bushing Neck Sizing Die (with decapping/expander unit and standard size button)
- Body Die
- Competition Micrometer Seating Die
- Plastic storage case
Frequently Asked Questions
Do neck bushings come with the Redding Type S Match 6mm Dasher set?
No, bushings are sold separately so you can pick the exact diameter that matches your brass and chamber. The neck die accepts interchangeable bushings in .001" increments, which is standard across the Type S line. Most Dasher reloaders buy a few sizes to fine-tune neck tension.
What bushing size should I start with for 6mm Dasher?
The reliable method is to seat a bullet in a sized case, measure the outside neck diameter of that loaded round, and subtract .002" to .003" to allow for brass springback. That number is your starting bushing. Since neck wall thickness varies by brass brand and whether you turn necks, it helps to grab one bushing on each side of your starting point to test.
What is the difference between this neck set and a full-length bushing set?
This Type S Match set sizes the neck with a bushing and includes a separate body die for sizing the case body and bumping the shoulder as two steps. A full-length bushing die handles the body and neck in one pass. Splitting the jobs gives you more control, which is why a lot of precision loaders prefer the neck-die-plus-body-die approach.
Does the Redding Type S Match set include a shell holder?
No, a shell holder is not included and will need to be purchased to match your press and the 6mm Dasher case head. The set includes the Type S neck sizing die, body die, Competition micrometer seating die, and a storage case.




Reviews
There are no reviews yet.