Description
If you shoot a .243 Win and you're chasing the last little bit of consistency out of your handloads, this Redding Type S-Match set is the kind of tooling that gets you there. The star of the show is the Type S bushing neck sizing die, which swaps out the one-size-fits-all approach of a standard die for interchangeable bushings in .001 inch increments. That means you pick your exact neck tension instead of settling for whatever the die maker decided. The bushing floats and self-centers on the case neck, which helps keep everything concentric and your bullets running straight.
What the Type S-Match Die Set Gives You
This is a three-die set, so you get the full package: the Type S bushing neck sizing die, a body die, and the Redding Competition Seating Die. The body die handles full-length body sizing and shoulder bump without touching the neck, which is handy once your cases get a little sticky to chamber after several firings and neck-only sizing. The Competition Seating Die is the one a lot of folks rave about. The seating stem is ground to match the bullet, the case and bullet are aligned in a sliding chamber before the bullet ever moves, and the micrometer top adjusts seating depth in .001 inch clicks so you can repeat a setting any day of the week.
Fine-Tuning Neck Tension With the Type S Bushing Die
The decapping rod is adjustable, so you can position the bushing to size only part of the neck if that's your preference. It comes with a standard size button for guys running commercial brass straight out of the box, plus a decapping pin retainer that lets you skip the button entirely if you sort or neck-turn your brass for uniformity. One thing worth knowing up front: bushings and the shellholder are sold separately. That's by design, since the whole point is choosing the bushing that matches your brass and bullet combo.
To size a bushing, measure the neck diameter of a loaded round and go roughly .002 inch under for a starting point, then adjust from there based on how your brass springs back and how much tension your rifle likes. Most reloaders end up keeping two or three bushings on hand as their brass changes with use.
Key Specifications
- Cartridge: .243 Winchester
- Die Set Type: Type S-Match Bushing Neck Sizing
- Number of Dies: 3
- Dies Included: Type S Bushing Neck Sizing Die, Body Die, Competition Seating Die
- Material: Case Hardened Steel
- Bushing Increments: .001 inch
- Seating Adjustment: Micrometer, .001 inch increments
- Bushings Included: No (sold separately)
- Shellholder Included: No (sold separately)
- Manufacturer: Redding
- Manufacturer Part Number: 38114
- UPC: 611760381140
- Shipping Weight: 1.8188 lbs
What’s Included
- Type S Bushing Neck Sizing Die (with decapping rod, standard size button, and decapping pin retainer)
- Body Die
- Competition Bullet Seating Die
- Plastic storage case
- Instructions
Frequently Asked Questions
Does the Redding Type S-Match set come with bushings?
No, the bushings are sold separately, and that is on purpose. The whole idea behind the Type S system is that you select the exact bushing that matches your brass, bullet, and desired neck tension. The shellholder is also not included.
What bushing size should I order for my .243 Win?
Measure the neck diameter of a loaded round, then choose a bushing about .002 inch smaller as a starting point. Keep in mind brass springs back a little after sizing and gets worked over time, so many reloaders keep a couple of bushings on hand to fine-tune tension. If you neck-turn your brass, you'll likely want a smaller bushing than your math suggests.
What's the difference between this set and a standard full-length die set?
A standard die squeezes the neck down and then pulls it back up with an expander ball, working the brass twice. The Type S bushing die lets you size the neck to the exact diameter you want in a single pass, which works the brass less and can extend case life. You also get a dedicated body die and the Competition Seating Die, which a standard set won't include.
Can I neck size without the expander button?
Yes. The set includes a decapping pin retainer that lets you run the die without the size button, which is the route reloaders take when they sort or neck-turn their brass for uniformity. The adjustable decapping rod also lets you position the bushing to size only part of the neck if you want.




Reviews
There are no reviews yet.