Description
The Redding Type S Match Bushing Full Die Set is the setup serious .24 Nosler handloaders reach for when group size matters more than speed. This two-die set pairs a Type S bushing full-length sizing die with a Competition Bullet Seating Die, so you can size the full body, set your shoulder bump, and dial in neck tension all in one operation. It is the same die family that shows up on competition benches and in the hands of folks chasing the tightest numbers their rifle will give them.
What the .24 Nosler Type S Full Die Set Does Differently
The magic is in the interchangeable bushing system. Bushings come in .001 inch increments and self-center on the case neck, which keeps runout down and lets you pick the exact neck tension your brass and bullet combo likes. The adjustable decapping rod means you can position the bushing to size only part of the neck if you want, and you can even run the sizing die as a body die by pulling the bushing and internal parts. Keep in mind bushings are sold separately, so you will want to measure a loaded round and subtract your desired tension to figure out the right size before you load.
Seating That Keeps Bullets Straight
The Competition Bullet Seating Die uses a sliding sleeve that supports the case and bullet in alignment before seating, plus a seating stem ground to match bullet diameter. The micrometer top is calibrated in .001 inch increments and adjusts smoothly without clicks, so repeating a seating depth or making a small change is quick and repeatable. The stem that ships with it handles most common bullet shapes, with VLD stems available separately for long, sleek projectiles.
A Few Things Worth Knowing
This set includes the full-length bushing sizing die, which comes with a decapping rod, a standard size button, and a decapping pin retainer for folks who turn or sort necks and prefer to skip the expander. Carbide size button kits are offered separately if you want to upgrade. The dies are built from case-hardened steel and use a standard 7/8-14 thread, and a shell holder is not included. For the .24 Nosler you will want the #10 shell holder.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 36320
- UPC: 611760363207
- Cartridge: .24 Nosler
- Die Style: Type S Match Bushing Full Length Die Set
- Dies Included: Type S Bushing Full Length Sizing Die and Competition Bullet Seating Die
- Bushing Increments: .001 inch (bushings sold separately)
- Seating Adjustment: Micrometer calibrated in .001 inch increments
- Material: Case-hardened steel
- Thread: 7/8-14
- Shell Holder: #10 (not included)
- Bullet Diameter: 0.243 in
- Shipping Weight: 1.8 lbs
What’s Included
- Type S Bushing Full Length Sizing Die
- Decapping rod with standard size button
- Decapping pin retainer
- Competition Bullet Seating Die with standard seating stem
- Plastic storage case
Frequently Asked Questions
Does the Redding Type S Match Bushing Full Die Set come with bushings?
No, the neck sizing bushings are sold separately so you can match the exact neck tension your brass and bullet combination needs. Bushings are offered in .001 inch increments. The easiest way to pick a size is to measure the neck of a loaded round and subtract the amount of tension you want, usually around .002 to .004 inch for rifle cartridges.
What dies are included in the .24 Nosler set?
This is a two-die set that includes a Type S Bushing Full Length Sizing Die and a Competition Bullet Seating Die. The sizing die handles full body sizing, shoulder bump, and neck tension in one pass, while the seating die uses a micrometer top and sliding sleeve for precise, repeatable seating depth.
Do I need a shell holder, and which one fits the .24 Nosler?
Yes, a shell holder is not included with this set. The .24 Nosler uses the #10 standard shell holder, so you will want to add one if you do not already have it in your kit.
Can the sizing die be used without the expander button?
It can. The die comes with a decapping pin retainer that replaces the standard size button, which is handy if you sort or neck turn your brass and want the bushing to do all the neck work. For factory or unturned brass, running the standard expander button helps keep neck tension consistent.




Reviews
There are no reviews yet.