Description
This is Redding's most complete bushing-die offering for the 6.5 Creedmoor, built for handloaders who care about every thousandth. Instead of squeezing the neck down too far and then yanking it back out with an expander, the bushing system lets you size the outside of the neck to exactly where you want it in a single step. That means less working of the brass, longer case life, and the kind of consistency that shows up on paper at distance.
What Comes in the Type S Elite 6.5 Creedmoor Set
The set includes three dies: a Type S bushing full-length sizing die, a Type S bushing neck sizing die, and the Competition Micrometer bullet seating die. Having both the full-length and neck-only sizers in one box gives you real flexibility. You can bump the shoulder and size the whole case when brass starts chambering tight, or run neck-only sizing to baby your fired brass between firings. The seater uses a micrometer top and a sliding sleeve that aligns the case and bullet before seating begins, which keeps runout low and lets you repeat a seating depth setting down to the mark.
Why the Bushing System on the Redding Type S Elite Matters
The heart of this set is the interchangeable bushing. Bushings come in .001 inch increments and float slightly in the die so they self-center on the case neck. Swap a bushing and you change neck tension without touching anything else in your process. The common starting point is to measure the outside neck diameter of a loaded round and subtract .001 to .002 inches, then fine-tune from there based on how your rifle shoots.
A Few Things Worth Knowing
Bushings and the shellholder are sold separately, so you'll want to grab the correct bushing for your brass and a #1 shellholder before your first session. Redding offers bushings in heat-treated steel or with a titanium nitride coating for lower sizing friction. The dies are made in the USA from case-hardened steel and ship in a protective storage box with a spare decapping pin.
Key Specifications
- Manufacturer: Redding
- Caliber: 6.5mm Creedmoor
- Die Set Type: Type S Elite Bushing 3-Die Set
- Pieces: 3 dies
- Bullet Diameter: 0.264 in
- Shellholder: #1 (sold separately)
- Thread: 7/8-14
- Material: Case-hardened steel
- Bushing Increments: 0.001 in
- Country of Origin: United States
- Manufacturer Part Number: 60446
- UPC: 611760604461
- Shipping Weight: 1.92 lb
What’s Included
- Type S Bushing Full Length Sizing Die (with decapping/expander unit)
- Type S Bushing Neck Sizing Die (with decapping/expander unit)
- Competition Micrometer Bullet Seating Die
- Plastic storage box
- Spare decapping pin
Frequently Asked Questions
Are bushings included with the Type S Elite 6.5 Creedmoor set?
No, the bushings are sold separately so you can match them to your specific brass and the neck tension you want. Bushings come in .001 inch increments in heat-treated steel or with a titanium nitride coating. The shellholder is also sold separately, and the 6.5 Creedmoor uses a #1 shellholder.
How do I pick the right bushing size for this set?
Measure the outside neck diameter of a loaded round with a quality micrometer, then subtract about .001 to .002 inches to allow for brass spring-back. That gives you a solid starting bushing, and you can go a thousandth smaller for more neck tension or larger for less. Most 6.5 Creedmoor loads live in the .288 to .293 inch bushing range depending on your brass and whether you neck turn.
What's the difference between the full-length die and the neck die in this set?
The Type S bushing full-length die sizes the body and bumps the shoulder while controlling neck diameter with the bushing, which is what you want when brass starts chambering tight. The neck die only sizes the neck, which works brass less and is popular for fire-formed cases in a single rifle. Having both lets you switch between approaches as your brass ages.
Is the Competition Seating Die really worth it over a standard seater?
The Competition Micrometer seater uses a spring-loaded sleeve that aligns the case and bullet before the bullet starts moving into the neck, which keeps runout low and bullets seated straight. The micrometer top lets you record and return to a seating depth exactly, which is a big help when you're load testing. It's widely considered one of the best factory seaters you can buy.




Reviews
There are no reviews yet.