Description
Neck tension is one of those details that separates a decent handload from a great one, and the Redding Type S Bushing Neck Die Set gives you a clean way to control it on .308 Winchester and 7.62 NATO brass. Instead of a fixed expander ball doing the work, this system uses interchangeable sizing bushings so you can set neck diameter and tension to your exact preference. The bushing floats enough to self-center on the case neck, which helps keep runout down and bullets seated straight.
How the Redding Type S Set Works on .308 Brass
The Type S bushing neck sizing die is the heart of the kit. Bushings are sold in .001-inch increments, so you can fine-tune how much grip your necks hold on the bullet. The adjustable decapping rod lets you position the bushing to size only part of the neck length if you want to leave a portion untouched, and the decapping rod comes with a standard size button that works great for folks running commercial brass as-is. If you sort or turn your necks for uniformity, a decapping pin retainer is included so you can neck size without the size button entirely.
What Comes in the Three-Die 78155 Kit
Along with the bushing neck sizing die, you get a body die and a Regular Series 92000 seating die. The body die full-length resizes the case body and bumps the shoulder for reliable chambering without touching the neck, which is a smart pairing for brass that has been fired a few times and needs its dimensions brought back in line. The seating die handles bullet seating and crimping. Together they cover the full handloading cycle for precision .308 work.
One thing worth knowing before you load up: bushings and the shell holder are sold separately. The easiest way to pick the right bushing is to measure the neck diameter of a few loaded or dummy rounds with a good micrometer, then choose a bushing a couple thousandths under that number. This set earns its keep for match shooters, varmint and big game hunters, and anyone chasing tighter groups out of their .308.
Key Specifications
- Manufacturer: Redding
- Caliber: .308 Winchester / 7.62 NATO
- Die Set Type: Type S Bushing Neck (3-Die Set)
- Manufacturer Part Number: 78155
- UPC: 611760781551
- Bushing Increments: .001 inch
- Material: Case hardened steel
- Thread: 7/8"-14
- Standard Shellholder: #1 (sold separately)
- Bushings: Sold separately
- Country of Origin: United States
- Shipping Weight: 1.5 lbs
What’s Included
- Type S bushing neck sizing die
- Body die
- Regular Series 92000 bullet seating die
- Adjustable decapping rod with standard size button
- Decapping pin retainer
- Spare decapping pin
- Plastic storage box
Frequently Asked Questions
Does the Redding Type S Bushing Neck Die Set come with bushings?
No, the neck sizing bushings are sold separately, as is the shell holder. This lets you choose the exact bushing diameter that matches your brass and the neck tension you want. Most .308 setups land somewhere in the .333 to .341 inch range depending on your brass and bullet.
How do I pick the right bushing size for my .308 loads?
The simplest method is to measure the neck diameter of a few loaded or dummy cartridges with an accurate micrometer, then select a bushing that is a thousandth or two smaller than that figure. You can also measure neck wall thickness with a ball micrometer or a case neck gauge and calculate from there. Bushings come in .001-inch steps so you can fine-tune tension once you get rolling.
What is the difference between the neck sizing die and the body die in this set?
The Type S bushing die sizes only the case neck and controls neck tension through the interchangeable bushing. The body die full-length resizes the case body and bumps the shoulder back for proper chambering without touching the neck. Using them together gives you precise neck tension while keeping your brass dimensioned for reliable feeding.
Will this set work with 7.62 NATO brass?
Yes, the .308 Winchester and 7.62 NATO share the same case dimensions, so this die set handles both. Keep in mind that military brass often has thicker necks and crimped primer pockets, so you may want to measure necks and account for that when choosing a bushing.




Reviews
There are no reviews yet.