0
0

Redding Type S Bushing Neck Die Set .223 Rem – 3 Die Precision Set

UPC: 611760781117

$147.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

For handloaders chasing tighter groups out of their .223 Rem, the Redding Type S Bushing Neck Die Set puts real control over neck tension right in your hands. Instead of a one-size-fits-all expander, the sizing die uses interchangeable bushings that let you choose exactly how much you size the neck, which keeps brass working less, lasting longer, and shooting straighter. The bushings self-center on the case neck during sizing, so concentricity gets a nice bump compared to a conventional neck die.

What the Redding Type S Set Does for Your .223 Brass

This is a three-die set built around precision. The Type S neck sizing die handles neck tension, the body die full-length resizes the case body and bumps the shoulder back without touching the neck, and the seating die seats your bullet and can be set up to crimp if you want it. That body die is handy when cases start chambering tight after several firings, letting you reset shoulder position without undoing your neck work. The adjustable decapping rod also lets you size just part of the neck length if you prefer partial neck sizing.

Picking Bushings for the Type S Neck Die

Bushings are sold separately, which is intentional since the right size depends on your brass and the neck tension you want. The simplest way to figure it out is to measure the outside neck diameter of a loaded or dummy round with a good micrometer, then drop down .001 to .002 inches for proper press fit on the bullet. Since bushings come in .001 inch increments, it's smart to grab two sizes close to your target so you can test and settle on what shoots best. The decapping rod ships with a standard size button, which is especially useful if you're running commercial brass as-is, and a decapping pin retainer is included so you can run bushing-only sizing if you sort or turn your necks.

The dies thread into any standard press with 7/8-14 threading, so they'll drop right into whatever single-stage or turret setup you're running. A #10 shellholder fits .223 Rem and is not included, so plan on having one on the bench before your first session.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 78111
  • UPC: 611760781117
  • Caliber: .223 Remington
  • Die Type: Type S Bushing Neck Sizing Die Set
  • Pieces in Set: 3 (Neck Sizing Die, Body Die, Seating Die)
  • Bushing Increments: .001 inch
  • Thread: 7/8-14 (fits standard presses)
  • Shellholder: #10 (sold separately)
  • Bushings: Sold separately
  • Shipping Weight: 1.6375 lbs

What’s Included

  • Type S Bushing Neck Sizing Die (with adjustable decapping rod and standard size button)
  • Body Die
  • Regular Series 92000 Bullet Seating Die
  • Decapping pin retainer
  • Storage box and instructions

Frequently Asked Questions

Do bushings come with the Redding Type S Bushing Neck Die Set?

No, bushings are sold separately. This is by design since the correct bushing depends on your brass thickness and the neck tension you're after. Measure the outside neck diameter of a loaded round and subtract .001 to .002 inches to find your starting size, then buy accordingly.

What's the difference between this neck set and a full-length Type S set?

This set neck sizes with the bushing die while a separate body die handles the case body and shoulder bump as a two-step process. A full-length Type S die sizes the body and neck in one pass. Neck sizing with a body die on hand is popular with precision reloaders who want minimal brass working and longer case life.

Does the Redding Type S Bushing Neck Die Set include a shellholder?

No, the shellholder is not included. For .223 Rem you'll want a #10 shellholder. It's worth having one on the bench before you start loading.

Will these dies fit my reloading press?

Yes, they use standard 7/8-14 threads, so they fit any common single-stage, turret, or progressive press. Just thread them in and adjust to your shellholder as you would any standard die.

Additional information

UPC

611760781117

Manufacturer

Manufacturer Part Number

78111

Shipping Weight

1.6375

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Neck Die Set .223 Rem – 3 Die Precision Set”