0
0

Redding Titanium Nitride Neck Sizing Bushing .317 (76317)

UPC: 611760763175

$34.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .317 bushing from Redding's Titanium Nitride line, the gold-colored insert that drops into your bushing-style die and lets you set neck tension exactly where you want it. It starts as the same heat-treated steel Redding uses across the board, then gets a titanium nitride surface treatment that bumps the hardness up near Rc 85 and cuts down on sizing friction. That slick finish means the brass glides through with less drag, which is a welcome thing when you're running a session of a few hundred cases.

How the .317 TiN Bushing Earns Its Keep

The whole idea behind a bushing die is control. Instead of oversizing the neck and then yanking it back open over an expander ball, you size the outside of the neck to exactly the diameter you want in a single step. Less working of the brass means less stress, better concentricity, and longer case life. To find your number, seat a bullet in a loaded round, measure the outside neck diameter with a good micrometer, and subtract about .001 to .002 inches to account for brass spring-back. That gives you roughly the neck tension most handloaders are after.

Fitment and Build of the Redding .317 Bushing

Measuring 1/2 inch outside diameter by 3/8 inch long, this bushing freely interchanges in all Redding bushing-style sizing dies, including the Type S and Competition neck dies, and it plays nice with Wilson-style bushings too. Every bushing is marked with its size, so there's no guesswork when you've got a drawer full of them. Redding offers this family in .001 inch increments from .185 through .368, covering calibers from .17 all the way up to .338.

Why Handloaders Reach for the TiN Version

The titanium nitride coating is about longevity and smoothness. It wears longer than plain steel and reduces the effort it takes to push a neck through, which is easy to appreciate over a long bench session. A smart move a lot of precision reloaders make is to keep the one above and below their ideal size on hand, so once a load is dialed they can experiment with a thousandth more or less tension to chase tighter groups.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 76317
  • UPC: 611760763175
  • Bushing Diameter: .317 in
  • Coating: Titanium Nitride (TiN)
  • Material: Heat-Treated Steel
  • Surface Hardness: Approx. Rc 85
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Type: Neck Sizing Bushing
  • Compatibility: All Redding bushing-style dies; interchanges with Wilson-style bushings
  • Quantity: 1

What’s Included

  • One Redding .317 Titanium Nitride neck sizing bushing (76317)

Frequently Asked Questions

What dies does the Redding .317 titanium nitride bushing fit?

It freely interchanges in all Redding bushing-style sizing dies, including the Type S neck sizing, Type S full length, and Competition neck sizing dies. It also works with Wilson-style bushings thanks to the standard 1/2 inch OD by 3/8 inch length. Just drop it into the die body and you're set.

How do I know if .317 is the right bushing size for my load?

Seat a bullet in a case, then measure the outside diameter of the loaded neck with a precision micrometer. Subtract about .001 to .002 inches from that number to allow for brass spring-back, and that gives you your bushing size. If your loaded neck measures around .318 to .319, the .317 is a solid starting point.

What's the advantage of the titanium nitride bushing over the plain steel version?

Both start as heat-treated steel, but the TiN coating pushes the surface hardness higher and slicks up the finish so there's less friction during sizing. That translates to smoother passes and longer wear life. If you're sizing a lot of brass or just want the least amount of drag, the titanium nitride version is worth it.

Do I still need an expander ball when using this bushing?

One of the main perks of a bushing die is sizing the neck to your exact diameter in a single step, which often lets you skip the expander ball entirely and reduce stress on the brass. Some reloaders prefer to keep the expander in for consistency, especially with brass that varies in neck wall thickness. It comes down to your setup and what gives you the best concentricity.

Additional information

UPC

611760763175

Manufacturer

Manufacturer Part Number

76317

Reviews

There are no reviews yet.

Be the first to review “Redding Titanium Nitride Neck Sizing Bushing .317 (76317)”