Description
Neck tension is one of those little details that separates so-so handloads from the ammo that stacks bullets on top of each other at distance. The Redding .280 Titanium Nitride Neck Sizing Bushing lets you control exactly how much your case necks get squeezed down, so you can size just enough to hold the bullet securely without over-working your brass. That means better concentricity, longer case life, and the kind of consistency that shows up on paper.
This is the titanium nitride version, which starts as heat-treated steel hand-polished to a surface hardness of Rc 60-62, then gets a TiN coating layered on top. That coating bumps the effective surface hardness way up and adds lubricity, so cases glide through with noticeably less effort and friction compared to a bare steel bushing. The gold-colored finish is the easy visual tell that you're looking at a TiN bushing and not a plain steel one.
How the .280 Bushing Fits Your Setup
Like every bushing in Redding's lineup, this one measures 1/2 inch O.D. by 3/8 inch long, so it freely interchanges across all Redding bushing-style neck sizing dies, including Type S and Competition dies. It also swaps in with Wilson-style bushings if that's what you're running. The die itself is sold separately, this listing is for the single .280 bushing.
Picking the Right .280 Size
The number stamped on the bushing is its inside diameter, and getting the right one is simple. Measure the outside neck diameter of a loaded or dummy round with a good micrometer, then subtract about .001 inch to allow for brass spring-back and proper bullet grip. If you're between sizes, it's worth owning a couple so you can fine-tune neck tension to your specific brass and load. Made in the USA, and clearly marked with its size so there's no second-guessing at the bench.
Key Specifications
- Bushing Diameter: .280 in
- Type: Titanium Nitride (TiN) coated neck sizing bushing
- Base Material: Heat-treated steel
- Surface Hardness: Rc 60-62 base, TiN coating raises effective hardness to approx. Rc 85
- Outside Dimensions: 1/2 in O.D. x 3/8 in long
- Compatibility: All Redding bushing-style neck sizing dies, including Type S and Competition; also Wilson-style
- Country of Origin: USA
- Manufacturer: Redding
- Manufacturer Part Number: 76280
- UPC: 611760762802
What’s Included
- One Redding .280 Titanium Nitride Neck Sizing Bushing (76280)
Frequently Asked Questions
What dies does the Redding .280 titanium nitride bushing fit?
It drops right into any Redding bushing-style neck sizing die, which covers the Type S and Competition die families. Thanks to its 1/2 inch O.D. by 3/8 inch dimensions, it also interchanges with Wilson-style bushings. Keep in mind the die is sold separately, this is just the bushing.
What's the difference between the titanium nitride bushing and the plain steel one?
Both start as heat-treated steel hand-polished to Rc 60-62. The titanium nitride version adds a TiN coating that raises the effective surface hardness and adds lubricity, so cases size with less friction and effort. It's the gold-colored bushing, which makes it easy to tell apart from the steel version at a glance.
How do I know if the .280 is the right bushing size for my cartridge?
Measure the outside neck diameter of a loaded or dummy round with a quality micrometer, then subtract about .001 inch to account for brass spring-back and proper bullet tension. If that math lands you at .280, this is your bushing. Many reloaders keep a couple of nearby sizes on hand so they can tune neck tension to their exact brass.
Does the number on the bushing refer to inside or outside diameter?
The stamped number is the inside diameter, which is what sizes your case neck. The outside dimensions stay a consistent 1/2 inch O.D. across the whole range so every bushing fits the same dies. The .280 marking is clearly engraved so you won't mix it up at the bench.





Reviews
There are no reviews yet.