0
0

Redding Titanium Nitride Neck Sizing Bushing .264 (76264)

UPC: 611760762642

$34.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're chasing tighter groups and longer brass life, neck tension is one of the biggest levers you can pull, and this .264 bushing from Redding is how you fine-tune it. Rather than overworking your case necks with a traditional one-size die, a bushing die setup lets you remove only the amount of brass you need. Pick the right bushing and you get just enough grip on the bullet without squeezing the neck down more than necessary.

This particular bushing is sized at .264 inches and carries Redding's titanium nitride treatment. The core is the same heat-treated hardened steel found in their standard bushings, but the TiN coating bumps up the surface hardness and adds lubricity, so cases glide through with noticeably less effort and less drag on the brass. Every bushing is clearly marked with its size, which makes swapping between loads quick when you've got a few on the bench.

Why the .264 Redding Bushing Earns Its Spot

To land on the right size, measure the outside neck diameter of a loaded round with a good micrometer, then subtract .001 to .002 inches to account for brass spring-back. That gives you proper neck tension to hold the bullet securely. Many loaders keep two or three bushings a thousandth apart so they can experiment and see what their rifle likes best.

Fit and Compatibility of the Redding TiN Neck Bushing

The bushing measures 1/2 inch outside diameter by 3/8 inch long, the standard footprint that drops into all Redding bushing-style neck sizing dies. It also interchanges with L.E. Wilson-style bushings and plays nicely with bushing dies from other popular brands. Redding makes these in .001 inch increments across the full range from .185 through .368, so once you're set up, matching bushings to new cartridges is easy. Made in the USA.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 76264
  • UPC: 611760762642
  • Bushing Diameter: .264 in
  • Coating: Titanium Nitride (TiN)
  • Base Material: Heat-treated hardened steel
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Type: Neck sizing bushing
  • Compatibility: Redding bushing-style dies and L.E. Wilson-style bushings
  • Country of Origin: USA

What’s Included

  • One Redding .264 titanium nitride neck sizing bushing (76264)

Frequently Asked Questions

How do I pick the right size Redding bushing for my load?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002 inches to allow for brass spring-back. That number gives you the bushing size that provides proper neck tension to hold the bullet. The .264 bushing suits loaders whose measured neck works out to that figure, commonly seen in some 6.5mm and 26 caliber setups.

What does the titanium nitride coating do compared to a plain steel bushing?

The titanium nitride bushing starts with the same heat-treated hardened steel core as Redding's standard bushings, but adds a TiN coating that increases surface hardness and lubricity. The result is less friction and less effort as the case neck passes through, which is easier on your brass. It's a popular upgrade for anyone running a lot of cases or chasing consistency.

Will this bushing fit dies other than Redding?

Yes. The standard 1/2 inch O.D. by 3/8 inch length footprint drops right into all Redding bushing-style neck sizing dies and interchanges with L.E. Wilson-style bushings. It also works with bushing dies from other popular brands built to accept that same bushing size.

Why use a bushing instead of a standard full-length sizing die?

A bushing setup lets you control exactly how much the neck gets sized down rather than working it the same amount every time. By choosing the right bushing you apply just enough neck tension to hold the bullet without overworking the brass, which helps consistency and extends case life. Many handloaders keep a few bushings a thousandth apart to tune their loads.

Additional information

UPC

611760762642

Manufacturer

Manufacturer Part Number

76264

Shipping Weight

0.0188

Reviews

There are no reviews yet.

Be the first to review “Redding Titanium Nitride Neck Sizing Bushing .264 (76264)”