Description
Neck tension is one of those little variables that quietly makes or breaks a precision load, and that's where the Redding .288 steel neck bushing earns its keep. This is the 73 style heat-treated steel bushing, part number 73288, sized at .288 inches to let you control how tightly the case neck grips the bullet. Instead of a fixed die size that may oversize your necks, a bushing setup lets you choose just enough tension to hold the bullet securely without overworking the brass.
How the .288 Redding Bushing Dials In Tension
The idea is simple once you see it in action. You measure the outside neck diameter of a loaded round with a good micrometer, then subtract roughly .001 to .002 inch to account for brass springback, and that number points you to the right bushing. The .288 covers a specific spot in Redding's lineup that runs in .001 inch steps, so you can fine-tune your sizing without jumping straight to an expander ball doing all the work. Less working of the brass usually means longer case life and more consistent results down range.
Why the 73 Style Steel Build Holds Up
These are made from heat-treated steel, hand-polished to a surface hardness in the Rc 60 to 62 range. That hardness does two things: it keeps the bushing dimensionally stable over thousands of cases, and the polished bore reduces friction so sizing takes less muscle. With the case neck properly lubed, the bushing slides over the neck cleanly and won't leave marks behind. Each one is stamped with its size so you're never guessing which is which on the bench.
Die Compatibility for the Redding Neck Bushing
The bushing is self-centering and swaps out freely, which makes changing tension a quick job. It drops into Redding bushing-style dies including the Type S neck and full-length sizing dies, and it interchanges with L.E. Wilson style bushings and other bushing-style dies that share the same format. If you're running a bushing die and want a reliable way to tune neck tension, this is a straightforward piece to add to your setup.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73288
- UPC: 611760732881
- Bushing Size: .288 in
- Style: 73 Style Neck Sizing Bushing
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62
- Finish: Hand Polished
- Dimensions: 1/2 in O.D. x 3/8 in long
- Sizing Increments: .001 in
- Compatibility: Redding bushing-style dies, interchanges with L.E. Wilson style bushings
- Country of Origin: United States
What’s Included
- One Redding .288 in 73 Style heat-treated steel neck sizing bushing
Frequently Asked Questions
How do I know if the .288 Redding steel neck bushing is the right size for my load?
Measure the outside neck diameter of a loaded cartridge using a precision micrometer, then subtract about .001 to .002 inch to account for brass springback and desired bullet tension. If that number lands at .288, this is your bushing. Redding offers these in .001 inch steps, so you can go a size up or down to fine-tune.
What dies does this 73 style bushing fit?
It drops into Redding bushing-style sizing dies, including the Type S neck and full-length sizing dies. It's also made to interchange with L.E. Wilson style bushings and other dies built for the same bushing format. The bushing is self-centering, so swapping it in is quick.
What's the difference between the steel bushing and the titanium nitride version?
This is the heat-treated steel bushing, hand-polished to Rc 60-62 hardness to reduce sizing effort. The titanium nitride version offers the same features but adds a TiN coating that boosts surface hardness and further cuts sizing friction. Both size identically; the TiN just slicks things up a bit more.
Will this bushing scratch or mark my case necks?
No. With the case neck properly lubricated, the polished steel bushing passes over the neck cleanly and leaves no marks. Keeping a light lube on your necks also keeps sizing effort low and extends the life of both the bushing and your brass.





Reviews
There are no reviews yet.