Description
Anyone who loads for .300 Blackout knows the round can be finicky, and the quality of your dies shows up fast on the target. This Redding Full Length 2-Die Set (80327) is built to take that guesswork out of the equation. You get a full length sizing die and a standard bullet seating die, both machined to the tight tolerances Redding has been known for across generations of reloaders.
What the Redding .300 Blackout Die Set Does on the Press
The full length sizing die works the case body, shoulder, and neck back down to minimum SAAMI dimensions, so your resized brass drops into any standard chamber without a fight. That matters a lot with Blackout, since plenty of folks are forming brass from cut-down .223 and chambering in semi-autos where reliable feeding is everything. Sizing the shoulder back and bumping headspace keeps rounds chambering smoothly round after round. The die includes a decapping rod assembly with an expander size button, so you deprime and size the neck in one stroke.
Seating Quality With the Redding 80327 Set
The seating die carries a bullet guide, a built-in crimp ring, and the proper seating plug, which helps you drop bullets in straight and seat them to a consistent depth. Whether you're loading heavy subsonic projectiles for suppressed work or lighter supersonic loads for general range use, consistent seating is what keeps your groups honest.
Built the Way Redding Builds Everything
Redding uses top-grade alloy steels and machines these dies on Hardinge Super-Precision lathes, then hand polishes and ultrasonically cleans each one before it ships. Both dies use the industry-standard 7/8-14 threaded body, so they thread right into any common single stage or progressive press. The plastic die box doubles as a cartridge loading block and holds a spot for your shellholder, which keeps everything together on the bench. Keep in mind the shellholder itself is sold separately, and for .300 Blackout you'll want a #10.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 80327
- UPC: 611760803277
- Caliber: .300 AAC Blackout
- Die Set Type: Full Length 2-Die Set
- Dies Included: Full Length Sizing Die, Standard Bullet Seating Die
- Thread Size: 7/8-14 (industry standard)
- Material: Heat-treated alloy steel
- Recommended Shellholder: #10 (sold separately)
- Bullet Diameter: 0.308 in
- Shipping Weight: 1.2375 lb
What’s Included
- Full Length Sizing Die with decapping rod assembly and expander size button
- Standard Bullet Seating Die with bullet guide, built-in crimp ring, and seating plug
- Spare decapping pin
- Hex/Allen wrench
- Instructions
- Redding plastic die box (doubles as a loading block with a spot for your shellholder)
Frequently Asked Questions
Does the Redding .300 Blackout die set come with a shellholder?
No, the shellholder is sold separately with this set. For .300 AAC Blackout you'll want a #10 shellholder. The die box does include a dedicated spot to store your shellholder once you have it.
Is this a two-die or three-die set?
This is the Full Length 2-Die Set (80327), which includes a full length sizing die and a standard bullet seating die. If you want a neck sizing die added, Redding offers a separate Deluxe 3-die set for .300 Blackout under part number 84327.
Will these dies work on a progressive press?
Yes. Both dies use the industry-standard 7/8-14 threaded body, so they thread into any common single stage, turret, or progressive press, including Dillon and similar setups. Reloaders running Redding dies on progressive machines report smooth, consistent operation.
Can I form .300 Blackout brass from .223 with this set?
This set is designed for full length sizing and seating of .300 Blackout cases, not for the cut-and-form process from .223/5.56. You'll still need to trim cut-down cases to length with a trimmer before sizing. Redding also makes a dedicated Form & Trim die (83327) if you're forming brass from scratch.





Reviews
There are no reviews yet.