Description
The .44-40 Winchester is a cartridge with character. That subtle bottleneck shape and famously thin case neck mean you can't just run it through a carbide pistol die and call it done. This Redding Series-A set gives you the three separate dies the round demands, so each step of the process gets its own dedicated tool and your old lever gun or single-action revolver gets fed properly.
What the Redding .44-40 Die Set Handles
Straight-wall and bottleneck-style cases like the .44-40 need three dies because you can't full-length size the body and expand the neck for a clean bullet fit in one pass. The full-length sizing die carries a decapping rod assembly to knock out the spent primer while it works the case body back to spec. The expander die opens the case mouth with a neck expanding plug so your bullet starts straight. The seating die brings a bullet guide, a built-in crimp ring, and the proper seating plug to set depth and roll a crimp in one stroke.
Built to Redding Standards
Series-A is Redding's most affordable line, but the machining is the same story as the rest of their catalog. These are cut on Hardinge Super-Precision lathes to tight tolerances, heat treated in controlled furnaces, hand polished, and ultrasonically cleaned before packaging. The bodies use the industry-standard 7/8-14 threads, so they'll thread into any common single-stage or turret press. Because these are steel sizing dies, case lube is part of the drill with the .44-40.
A Few Loading Notes Worth Knowing
That thin .44-40 neck measures only around seven thousandths at the mouth, so a trace of sizing wax wiped on and off does the job. Keep your cases trimmed to a uniform length and go easy on the crimp. A light, consistent roll turns the edge over without wrinkling the brass, which is exactly what this seating die is set up to deliver. The included die box doubles as a loading block and storage case, with room inside for a spare decapping pin, the hex wrench, and your shellholder.
Key Specifications
- Manufacturer: Redding
- Series: Series-A
- Caliber: .44-40 Winchester (.44 WCF)
- Dies Included: 3 (Full-Length Sizer, Expander, Seater)
- Case Type: Straight-wall / bottleneck WCF
- Die Material: Steel (case lube required)
- Thread Size: 7/8-14 industry standard
- Manufacturer Part Number: 80188
- UPC: 611760801884
- Shipping Weight: 1.2813 lbs
What’s Included
- Full-length sizing die with decapping rod assembly
- Expander die with neck expanding plug
- Bullet seating die with bullet guide, built-in crimp ring, and seating plug
- Plastic die storage box (doubles as a loading block)
- Spare decapping pin
- Hex wrench for lock rings
Frequently Asked Questions
Why does the .44-40 need a 3-die set instead of a carbide 2-die set?
The .44-40 has a subtle bottleneck shape rather than a true straight wall, so there's no carbide sizing die for it and you can't size the body and expand the neck in a single operation. The three dies split that work into full-length sizing, neck expanding, and seating with crimp. This separation is what lets you load the cartridge cleanly without crushing the thin brass.
Do I need to lubricate cases with this Redding die set?
Yes. These are steel sizing dies, so case lube is required before running .44-40 brass through the full-length sizer. Just a trace of sizing wax applied with your fingers and wiped off afterward does it. Too much lube can dent the delicate case, so a light touch is the way to go.
Is a shellholder included with the Redding .44-40 die set?
No, the shellholder is sold separately. The die box does include a dedicated spot to store your shellholder once you have one, along with a spare decapping pin and the hex wrench. You'll want to pick up the correct shellholder for the .44-40 rim to run these dies.
Will these dies work on my press?
They should. Every Redding die uses the industry-standard 7/8-14 threaded body, so this set threads into standard single-stage, turret, and most progressive presses. As long as your press takes 7/8-14 dies, you're set.





Reviews
There are no reviews yet.