$34.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're running a Redding bushing-style sizing die and want real control over neck tension, this .330in bushing is the piece that makes it happen. Instead of over-working your brass with a one-size-fits-all die, you pick the exact bushing that matches your loaded cartridge, and you get just enough grip to hold the bullet where you want it.
The .330in bushing is built from heat-treated steel, then finished with a titanium nitride coating. That gold-colored TiN surface bumps up the hardness and cuts down on friction, so sizing effort drops and your necks come out cleaner. With the case neck lubed, you'll often find it leaves little to no marking on the brass, which is exactly what you want when you're chasing consistency.
This bushing shares the standard Redding external dimensions of 1/2 inch outside diameter by 3/8 inch long, so it drops right into all Redding bushing-style dies and interchanges freely with other brands that use the same footprint. Redding offers these in .001 inch steps across the full range, so once you know your number, you can fine-tune neck tension down to the thousandth.
Sizing the bushing is simple. Measure the outside neck diameter of a loaded round with a good micrometer, then subtract .001 to .002 inches to allow for brass spring-back and proper bullet tension. That gives you your target bushing size. Every bushing is marked with its size, so there's no guesswork once it's in the drawer.
For handloaders working up precision rifle loads, bushings like this are how you take the next step past standard dies. You stop guessing and start controlling one of the most important variables in accurate reloading, and the TiN finish just makes the whole process smoother over the long haul.
It fits all Redding bushing-style sizing dies, including the Type S Full and Neck Sizing dies. Because it uses the standard 1/2 inch outside diameter by 3/8 inch long dimensions, it also interchanges with other brands that use the same bushing footprint.
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002 inches. That accounts for brass spring-back and the bullet tension you need to hold the bullet securely. The result is your target bushing size, so if that math lands on .330, this is your bushing.
The TiN bushing has the same heat-treated steel core and Rc 60-62 hardness as the standard version, with an added titanium nitride surface that increases hardness even further and reduces sizing friction. In practice that means smoother sizing and cleaner case necks. With the neck lubed, it tends to leave little to no marking on the brass.
A bushing lets you set the exact amount of neck tension rather than relying on a fixed die that can over-work the brass. By selecting the correct bushing, you hold the bullet with just the right grip without excessive resizing, which helps extend case life and improve consistency. It's one of the key steps handloaders take toward more precise, repeatable ammo.
| UPC | 611760763304 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 76330 |
| Shipping Weight | 0.0188 |
You must be logged in to post a review.
Reviews
There are no reviews yet.