Description
Precision handloading comes down to control, and Redding's .270 Titanium Nitride Neck Sizing Bushing gives you plenty of it. Rather than oversizing the neck and springing it back with an expander, you pick the exact bushing that sets the neck tension you want in a single pass. This one measures .270 inches and carries Redding part number 76270, machined from heat-treated steel and finished with a titanium nitride coating that cuts friction and bumps up surface hardness for a slicker, more consistent sizing stroke.
What the .270 TiN Bushing Does on the Bench
By choosing the right diameter, you give the case neck just enough grip to hold the bullet firmly without working the brass harder than it needs to be. That means less brass fatigue, more reloads per case, and better round-to-round uniformity, which is exactly what you're chasing when you're loading for accuracy. The titanium nitride treatment adds real lubricity, so the stroke feels smooth and the finish holds up over long sessions at the press.
Fitment and Interchangeability of the Redding 76270 Bushing
This bushing shares the standard external dimensions of 1/2 inch O.D. by 3/8 inch long, and it drops right into all Redding bushing-style sizing dies. It also freely interchanges with Wilson-style bushings, so if you're already running a Type S die or a compatible setup, it fits without fuss. Redding offers these in .001 inch increments across a huge range, which lets you fine-tune neck tension to your specific brass and load.
Picking the Right Size for Your .270 Brass
The tried-and-true method is simple: measure the outside neck diameter of a loaded cartridge with a good micrometer, then subtract about .001 to .002 inch to account for brass spring-back. If your neck wall thickness varies quite a bit and you haven't turned your necks, you may want to go a touch smaller and let a sizing button finish the inside diameter. A little measuring up front saves you a lot of guesswork later.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76270
- UPC: 611760762703
- Bushing Diameter: .270 inch
- External Dimensions: 1/2 inch O.D. x 3/8 inch long
- Material: Heat-treated steel
- Surface Treatment: Titanium Nitride (TiN) coating
- Compatibility: Fits all Redding bushing-style sizing dies; interchanges with Wilson-style bushings
- Application: Precision neck sizing / handloading
- Country of Origin: United States
- Shipping Weight: 0.0313 lbs
What’s Included
- One (1) Redding .270 Titanium Nitride Neck Sizing Bushing (MPN 76270)
Frequently Asked Questions
What dies does the Redding .270 titanium nitride bushing fit?
It fits all Redding bushing-style sizing dies, including the Type S line, thanks to the standard 1/2 inch O.D. by 3/8 inch long dimensions. It also freely interchanges with Wilson-style bushings, so a lot of popular setups will take it without any modification.
How do I know if the .270 size is right for my brass?
Measure the outside neck diameter of a loaded cartridge with a micrometer, then subtract roughly .001 to .002 inch to allow for brass spring-back. If your neck wall thickness varies a lot and your necks aren't turned, you may want to size down a bit more and use an expander or sizing button to set the final inside diameter.
What does the titanium nitride coating actually do?
The TiN surface treatment increases the effective surface hardness and reduces friction during sizing. In practice that means a smoother, easier stroke at the press and a durable finish that holds up over a lot of reloading sessions.
Why use a bushing instead of a standard neck sizing die?
A bushing lets you set a precise amount of neck tension without oversizing and then re-expanding the neck. That reduces how hard you work the brass, which extends case life and improves consistency from one round to the next.




Reviews
There are no reviews yet.