Description
A shell holder is one of those small parts that makes or breaks your time at the press, and Redding builds the E-Z Feed #1 to earn its spot. This is the holder you'll reach for across a big group of common cartridges that share the same case head size, including 308 Winchester, 30-06 Springfield, 243 Winchester, 270 Winchester, 7mm-08 Remington, 6.5 Creedmoor, 25-06 Remington, 260 Remington, and 45 ACP, among others. If you load more than one of those, a single #1 covers a lot of ground on your bench.
What Sets the Redding #1 E-Z Feed Apart
The standout here is the tapered design cut into the top of the holder. That little bevel guides the case rim into the slot so you're not fumbling to seat brass by feel, which adds up fast when you're running volume. It's machined to tight tolerances so cases sit square and consistent, and the snap-in base lets you rotate the holder to whatever position feels natural in your press.
Built From Heat-Treated Steel
Redding heat-treats the steel on these holders, so they hold up to the repeated force of full-length sizing without wearing or deforming over time. The outside knurling gives you a solid grip when you're swapping holders mid-session, no slipping with oily or lubed fingers. Reloaders who've run tighter brass like Lapua often mention that Redding's dimensions give cases a clean slide in and out where other brands can grab.
Fits Your Press Without Guesswork
The universal design drops right into most single-stage and turret presses from the popular brands, so you're not locked into one maker's ecosystem. It's a straightforward, well-made piece that does exactly what a shell holder should: hold your case rock-steady through sizing, priming, and seating so your rounds come out consistent. For precision loaders who care about repeatable results, starting with quality tooling like this makes everything downstream easier.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 11001
- UPC: 611760110016
- Model: E-Z Feed Shell Holder #1
- Type: Shell Holder
- Material: Heat-Treated Steel
- Finish: Outside Knurling
- Design: Tapered, Snap-In Universal
- Fits Cartridges: 308 Win, 30-06 Sprg, 243 Win, 270 Win, 7mm-08 Rem, 6.5 Creedmoor, 25-06 Rem, 260 Rem, 45 ACP and others
- Press Compatibility: Most single-stage and turret presses
- Quantity: 1
- Style: Press Type
What’s Included
- Redding E-Z Feed #1 Shell Holder (1)
Frequently Asked Questions
What cartridges does the Redding #1 shell holder fit?
The #1 covers a wide range of cartridges that share the same case head diameter, including 308 Winchester, 30-06 Springfield, 243 Winchester, 270 Winchester, 7mm-08 Remington, 6.5 Creedmoor, 25-06 Remington, 260 Remington, and 45 ACP, plus several others. If your cartridge is based on one of those parent cases, there's a good chance the #1 is the right pick. Checking a shell holder chart for your exact round is always a smart move before loading.
Will the Redding E-Z Feed #1 work in my press?
The universal snap-in design is built to fit most single-stage and turret presses from the popular brands. You're not tied to running Redding dies or a Redding press to use it. If you have a standard T-slot ram on your press, it should drop right in.
What makes the E-Z Feed design different from a standard shell holder?
The E-Z Feed has a tapered mouth machined into the top that guides the case rim into the slot, so loading brass is quicker and smoother. That taper really shows its value when you're sizing a lot of cases in one sitting. Combined with the outside knurling, it's an easy holder to load and to swap.
Is the Redding #1 shell holder made from durable material?
Yes, it's machined from steel and then heat-treated to handle the repeated pressure of full-length resizing without wearing out or deforming. The knurled exterior gives you a confident grip even with lube on your hands. It's the kind of part that holds its tolerances for a long time.




Reviews
There are no reviews yet.