Description
If you're serious about squeezing every bit of accuracy out of your .300 Winchester Magnum handloads, the Redding Competition Seating Die is one of the tools that separates good ammo from great ammo. Redding built this as a straight-line bullet seater that solves the concentricity problems you run into with ordinary seating dies. A sliding sleeve inside the die captures and aligns the case before the bullet ever starts to move, so the bullet goes in dead straight instead of slightly cocked to one side. For precision work, that kind of alignment is the whole ballgame.
How the Redding Competition .300 Win Mag Die Keeps Things Straight
The heart of this die is the floating seating stem. The fit between the bullet guide and the seating stem is so tight that the stem can be shown to float on a column of air, and the stem itself is precision ground to match .308 bullet diameter. Combined with the chamber-style sleeve that holds the case in alignment through the entire stroke, you get runout numbers that are tough to beat with any standard seater.
Dialing In Seating Depth With the Micrometer Head
The micrometer adjustment is calibrated in .001 inch increments and adjusts infinitely without clicks, so you can fine tune to exactly where your rifle likes the bullet. There's also a zero set feature that lets you zero the micrometer to your favorite seating depth, which makes going back to a proven load quick and foolproof. Load development becomes a lot less of a guessing game when you can record a number and return to it every time.
The die uses standard 7/8 inch by 14 threads, so it drops into any common single stage or progressive press. One thing worth knowing up front: this is a seating die only and it does not crimp, and it's meant for standard rather than heavily compressed powder charges to protect the precision internals. For the .300 Win Mag reloader chasing tight groups at distance, it's a worthy addition to the bench.
Key Specifications
- Manufacturer: Redding
- Caliber: .300 Winchester Magnum
- Die Type: Competition Bullet Seating Die (seat only)
- Design: Straight-line with sliding chamber sleeve
- Adjustment: Micrometer, calibrated in .001 inch increments, infinitely adjustable
- Seating Stem: Precision ground to .308 bullet diameter, floating design
- Thread: 7/8 inch x 14 TPI
- Bullet Diameter: 0.308
- Standard Shellholder: #6
- Crimp: Does not crimp (crimp die sold separately)
- Manufacturer Part Number: 55153
- UPC: 611760551536
- Shipping Weight: 1.05 lbs
What’s Included
- One Redding Competition Seating Die with precision ground sliding chamber sleeve
- Micrometer adjustment head with precision ground bullet seating stem
- Die box
Frequently Asked Questions
Does the Redding Competition Seating Die for .300 Win Mag crimp the bullet?
No, this is a seating die only and it does not crimp. If you want to apply a crimp to your .300 Win Mag loads, you'll need to add a separate crimp die. Most precision reloaders running this die skip crimping anyway in favor of neck tension.
Will this die fit my press?
Yes, it uses the standard 7/8 inch by 14 TPI thread found on virtually all common single stage and progressive presses. It's primarily designed for single stage precision work, but bottleneck calibers like the .300 Win Mag run fine on progressive machines too. You'll use a #6 standard shellholder with this caliber.
What makes the Redding Competition die better than a standard seating die?
The big difference is the sliding sleeve that fully captures and aligns the case before the bullet starts seating, which dramatically reduces bullet runout. It also uses a floating seating stem precision ground to match bullet diameter for consistent, straight seating. The micrometer top adds repeatable depth control you just don't get on a basic seater.
Can I use the micrometer to return to a known seating depth?
Absolutely. The micrometer is calibrated in .001 inch increments and includes a zero set feature, so once you find the depth your rifle shoots best you can record the setting and dial right back to it. That makes load development and repeating proven loads quick and consistent.




Reviews
There are no reviews yet.